No Diving Swimming Pool Sign - 1.2mm Rigid Plastic 300mm x 200mm

Product Information

Printed onto ultra smooth 3mm foamex, these health and safety signs can be used in medium to long term. Once a diver communicates that she is low on air, she and her diving partner should agree to make a slow and controlled ascent to the surface and end the dive by using the "up" signal. The first method (common in recreational diving) is to hold up a flat hand, palm forward, as a traffic cop would. No Diving signs are an important part of promoting water safety awareness and preventing accidents in the UK and are seen in a variety of places, both by the coast and inland.

No Diving Sign | Lifebuoys Direct

The "level off" hand signal is used to tell a diver ​to remain at the current depth or maintain this depth. Our correx health and safety signs are printed on British manufactured 4mm correx sheets, sometimes know as fluted polypropylene.You can also check out the HSE wesbite for full details on what health and safety signage is required by law.

No diving sign - Warning Safety Signs

Using all five fingers to point out a direction of travel helps to avoid confusion with the "look" signal, which is made by pointing with a single index finger. The most durable of our health and safety signs, aluminium composite, also often known as dibond is for long term use. The "bubbles" or "leak" signal communicates that a diver has noticed a leaking seal or bubbling piece of gear either on herself or her buddy. The "level off" signal is most commonly used to communicate that divers have reached the planned maximum depth for a dive or to tell divers to hold previously designated depth for a safety or decompression stop. This hand signal is not used to indicate an emergency but to communicate that a diver has reached the predetermined tank pressure reserve for the dive.By the coast these signs may be posted along the shoreline, in places such as harbours, jetties, ports and other areas where diving in to the water poses a risk. Cookies collect information about your preferences and your devices and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests. Dibond health and safety sign boards can easily be drilled and screwed to walls or you can also use a grab adhesive of VHB tape. The "OK" sign is made by joining both arms in a ring above the head, or if only one arm is free, by touching the top of the head with the fingertips.