JET Rack® Van Interior Ladder Storage System - Storage System Only

Product Information

Take advantage of this unused interior space of your cargo van and eliminate the back breaking hassle of loading ladders on the roof. The strut acts as the rail for JET Rack® to run along, so will need to be cut to size for the van and/or ladders being used.

The links above will take you to our request information page which will forward your enquiry to our team. I have since changed this as I do a bit of hobby carpentry, and other house destruction - I needed to carry 4x8' sheet goods, but my ladder rack on the roof and it's conduit carrier don't allow that. Please provide as much detail as possible so that we can get back to you with the right information. The JET Rack® interior ladder storage system will quickly and efficiently secure your ladder on the ceiling or walls of your vehicle. Plus, its universal fitment means it's transferable when you change vehicle, making it a wise and cost-effective investment for any tradesperson.JET Rack ® not only keeps your ladders safe and secure, but also helps you to maximise your van's storage space and keep it organised. NONE of this impedes any shelf space or other storage and I can get 7-8 stack of 4x8 sheets INSIDE the van at the ceiling level. The easy to install system will keep your ladders up, out of the way, and protected from theft and damaging weather.

Purchase your JET Rack ® system with an optional Universal Mount System kit for use with truck caps or vans with protruding roof support beams. For mounting, a 7/8" deep Unistrut type hanger rail, not included, is mounted to the flat surface where you want to mount your JET Rack®. Simply hook the ladder’s top shelf hole onto the Jet Rack’s receiving pin, slide the ladder forward into place, and secure the foot of the ladder to the JET Rack’s catch bracket. The JET Rack step ladder storage system mechanism is then mounted to the Unistrut™ to complete the installation, usually in about 30 minutes. You can use a twin JET Rack® set up to hold ladders without a hole in the top, but the maximum depth of the ladder (in closed position) must be under 12cm.Innovative and easy-to-use, its tension-based mechanism accommodates most A-frame ladders up to 10' long, with a custom fit that won't let ladders shake loose during transport and storage.