276°
Posted 20 hours ago

TP-LINK TL-WR802N - wireless router - 802.11b/g/n - desktop(TL-WR802N)

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) Port Range - The port range which the Interior PC access the outside PC. If all are blank or 0, the domain is noneffective. How to setup Local and Remote Management rules on TL-WR802N/WR810N (standard router and hotspot router mode-new logo) 06-27-2022 35563 The TP-Link router includes four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Virtual Servers, Port Triggering, UPNP and DMZ. How to configure Virtual Servers on TL-WR802N/WR810N (standard router and hotspot router mode-new logo) 06-27-2022 31307

How to configure Access Control on TL-WR802N (standard router and hotspot router mode-new logo) 06-27-2022 33371 It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port and protocol to use. MTU(Bytes) - The default MTU size is 1500 bytes. It is not recommended that you change the default MTU size unless required by your ISP. Why cannot I access the Internet after successfully connected to the TP-Link router’s wireless network(Windows OS)? 09-06-2019 1552005 Subnet Mask - Enter the subnet mask in dotted-decimal notation provided by your ISP. Normally 255.255.255.0 is used as the subnet mask.For example, due to some port restriction, when playing the online games, you can log in normally but cannot join a team with other players. To solve this problem, set your PC as a DMZ host with all ports opened. How to configure Dynamic DNS on TL-WR802N/WR810N (standard router and hotspot router mode-new logo) 06-27-2022 33751 Wireless Radio - Indicates whether the wireless radio feature of the router is enabled or disabled. Transmit Power - Select High, Middle or Low which you would like to specify for the router. High is the default setting and recommended.

H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT, keep the default Enable. VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP or L2TP protocols to pass through the router’s firewall. WEP Key Format - Hexadecimal and ASCII formats are provided here. Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. ASCII format stands for any combination of keyboard characters in the specified length. Access Control is used to deny or allow specific client devices to access your network with access time and content restrictions.

GPL Code

When you build up a server in the local network and want to share it on the internet, Virtual Servers can realize the service and provide it to internet users. At the same time virtual servers can keep the local network safe as other services are still invisible from the internet.

Secondary Connection - It’s available only for PPPoE connection. If your ISP provides an extra connection type, select Dynamic IP or Static IP to activate the secondary connection. MTU (Bytes) - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU size unless required by your ISP. Select Allow the stations specified by any enabled entries in the list to access as the filtering rule. When using this guide, please notice that features of the router may vary slightly depending on the model and software version you have, and on your location, language, and internet service provider. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only.Wireless Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network. Priority - Priority of Bandwidth Control rules. ‘1’ stands for the highest priority while ‘8’ stands for the lowest priority. The total Upstream/ Downstream Bandwidth is first allocated to guarantee all the Min Rate of Bandwidth Control rules. If there is any bandwidth left, it is first allocated to the rule with the highest priority, then to the rule with the second highest priority, and so on. Enable Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules will take effect. WEP Key - Select which of the four keys will be used and enter the matching WEP key. Make sure these values are identical on all wireless clients in your network. Channel - This field determines which operating frequency will be used. The default channel is set to Auto. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

If using a cable modem, unplug the Ethernet cable and reboot the modem. Wait until its Online LED is on and stable, then reconnect the Ethernet cable to the modem.Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. How to configure IP&MAC Binding on TL-WR802N/WR810N (standard router and hotspot router mode-new logo) 06-27-2022 31501 Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment