Ultra Helium Hi-Float Latex Balloon Treatment Kit

Product Information

Her husband, Don, was a chemical engineer who worked in research-and-development. Marjorie asked him if there was a way to increase the floating life of latex balloons. Don went to work on the problem at night in his basement shop, and after about a year, he had developed HI-FLOAT. The rest is history; HI-FLOAT has become a phenomenal success. Normalt svæver en 11”/30 cm latex ballon omkring 5-7 timer før den begynder at falde til jorden. Større balloner svæver meget naturligt længere da der bruges væsentlig mere helium. Ballonen fyldes nu med helium til den har form som en pære. Svæver den ikke lige skal der lidt mere helium i Ballonen skal være i stuetemperatur i minimum 2 timer før den må flyttes til et koldere eller varmere lokale

t Float When First Inflated - HiFloat Balloons Don’t Float When First Inflated - HiFloat

Latex balloons treated with Ultra Hi-Float can float up to 25 times longer when kept indoors in a climate controlled location.So, to err on the side of caution – consider using a little more helium than you might think to use before tying! Both Balloons Treated with One Pump of Hi Float. The Right Balloon Has Been Inflated with More Helium. The Leaning Hi Float Balloon Only Lasted 48 Hours. Use Less Hi Float We know that the purpose of using Hi Float is to extend the float time – but, why would you want to do this? Vi anbefaler at når man er færdig med at bruge Hi-float, så rengører man pumpen med det samme. Her er det vigtigt, at man lader pumpen tørre fuldstændig så den er klar til brug igen. Det er en rigtig god ide altid at teste produktet nogle dage inden arrangementet, så du kender mængden du skal bruge i dine balloner. Skal du pynte op til en konfirmation, fest, fødselsdag eller et bryllup - så vil du gerne have at dine balloner svæver hele festen. Det kan dog være en umulig mission uden produktet: Hi-float.

Hi Float for 100 Balloons | Party Balloons | Party Pieces

You know that sinking feeling when helium balloons lose their float too soon? Problem solved – with ULTRA HI-FLOAT.After the solution is inside of the balloon, massage the solution around the balloon to get an even coat. Even using the recommended amount of Hi Float, when I blew up the balloon to its intended size – it did float, but it leaned and drooped. 12 Inch Balloon with Recommended One Pump of Hi Float Same Balloon vs Balloon With No Hi Float and Same Amount of Helium The makers of Hi Float claim that a typical 11 inch balloon will last 1-4 weeks, which is a significant increase of 12-18 hours.

Hi-Float Latex Balloon Treatment Kit 2 X Ultra Helium Hi-Float Latex Balloon Treatment Kit

Don’t leave your balloons outside overnight. They will shrink during the night, then pop the next day But, if you want your foil balloons to be shaped in numbers or alphabet characters, make sure you get 24″ or larger, otherwise, they may not float. For example, some 16” Number or Alphabet foil balloons may not fly with helium, because of their shape and weight. Use larger size for these types. If you use the really large ones, then these latex helium balloons can last much longer depending on the temperature where they spend the day. If you put them inside, then these large ones can float for 2-3 days, even without pre-treating them with hi-float.

🍪 Privacy & Transparency

Best of all, HI-FLOAT is convenient and easy to use. In fact, you can inflate your balloons a day before the party so that you can concentrate on other preparations. No more last-minute decorating!