Fluke Networks MT-8200-60-KIT IntelliTone 200 LAN Toner and Probe Kit

Product Information

While this termination reduces noise and crosstalk in the cable, it can also absorb an analog toner signal, making the connected cable impossible to detect with an analog audio probe. The SmartTone analogue signal will change ‘songs’ each time the pair under test is shorted together. You can clearly identify a specific cable with in a bundle or connected into a patch panel or switch, plus detect faults such as opens, shorts and reversed pairs.

Use analogue mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring. Verifying proper routing and termination of this diverse set of cabling types requires tools optimized for different frequencies, connector types, and work environments. Cablemap - The IntelliTone Pro LAN 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. On the telecom side, there can be a variety of jacks and wiring schemes ranging from a single pair on a 4-position wall jack to 4 pairs connected from the 8 position modular jack to the terminating block.The IntelliTone™ Pro LAN Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. The same patch cable can then be used to validate the correct cable using the Cablemap feature on the IntelliTone Pro 200 probe. The presence of Ethernet indicates the connection is active and best located on the patch cables from the patch panel to the switch. SmartTone analog toning eliminates frustrating guesswork locating individual wire pairs during installations. Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. MicroScanner2 features built-in IntelliTone digital and analog toning to precisely locate virtually any cable or wire pair, regardless of work environment.The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks gives you cutting-edge digital and analog cable locating technologies that are as advanced as the systems you work with. The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. It eliminates the need for both a toner to a wiremapper, and provides 100% confirmation that the right cable has been located. Once located, the office wiring can be verified for shorts, opens and mis-wires using a standard 110 to 8-position patch cable and the Cablemap feature on the IntelliTone Pro 200 probe.

If the service identification in the office indicated an Ethernet connection, the user should begin probing the cables that are patched to active network equipment. The telecom 5-way Alligator Lead Set also offers a secure attachment to 66 blocks using the U shaped nose for blade-shaped terminals. Once the cable is located, the IntelliTone Pro 200 LAN probe provides a Cablemap to assure correct pin-to-pin wiring. IntelliTone Pro 200 LAN Toner and Probe Kit includes: IntelliTone 200 LAN Toner and 200 Probe, coax F connector adapter, 2 x RJ11 and 2 x RJ45 patch cables, test leads with alligator clips, lanyards, quick start guide and 9-volt batteries. Fluke Networks IntelliTone 200 Probe Includes: IntelliTone 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.Digital mode especially performs in environments with high data, RF, or electromagnetic interference. Get advanced SuperVision for locating cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Get advanced vision for locating cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Telecom Troubleshooting - Check telecom services with Line 1 continuity and polarity testing on the IntelliTone Pro LAN 100 and 200 Toners. IntelliTone Pro 200 LAN Toner LEDs clearly identify common datacom services found on today's networks including 10/100/Gigabit Ethernet links.

More recent installations, per the TIA-568 standard, consist of an RJ-45 jack in the office with all 4 pairs punched down on the 110 blocks. The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable mis-wires in twisted pair cabling. The TIA-568A standard requires that all work areas be wired with a minimum of two jacks with the horizontal cabling being four-pair 100 ohm UTP. Only IntelliTone™ Pro LAN Toners and Probes offer the powerful combination of digital and analog technologies to resolve common infrastructure problems that arise during installing, maintaining, and changing of your network. Digital toning is especially helpful once the cable has been located as it displays cable wiremap and checks for shorts, opens and miswires.Only IntelliTone™ Pro LAN Toners and Probes offer the powerful combination of digital and analog technologies to resolve common infrastructure problems that arise during installing, maintaining, and changing of your network.