Truetone NW1-B - 1 SPOT Series - 9v pedal power supply

Product Information

You need to assess your pedals’ power requirements: do they all need 9V, or are some running at 12, 15 or 18V? It's worth noting that some overdrive pedals offer the ability to run at higher voltages for increased headroom, too. It is important for you to know the power requirements for your pedal. For every pedal that you are going to power via the 1 SPOT Pro CS12, you need to know the following: In keeping with the tradition of the 1 Spot, Truetone have opted to use the same Switching Power Supply technology for the 1 Spot Pro range. This switching technology is able to handle much more current than the older, transformer-based power supplies. This means you don't have to worry if your pedal's current draw slightly exceeds the stated amount on your output - so long as the total across the board doesn't exceed 1600mA.

The Truetone 1 Spot Pro CS6 Power Supply compes complete with everything you need to simplyplug-and-play. x CYR – (5.5x2.1mm barrel input, 5.5x2.1 barrel output; reverse polarity) Red – reverse polarity converter Input Voltage: The 1 SPOT Pro CS6 can be used anywhere in the world without the use of a step-up or step-down transformer. It transforms wall voltage anywhere between 100-240Vac.With optional converter plugs, the 1 SPOT will work with virtually ANY 9V pedal! …even Line 6 modeling pedals! ** Now available from Merchant City Music, online and in our Glasgow store, the Truetone 1 Spot pedal AC adaptor is the solution to your niggling pedal powering problems. We ship fast to the UK and Europe. Truetone 1 Spot Power Supply The low-profile design of the 1 SPOT Pro CS6 allows it to be mounted under flat pedalboards like the Pedaltrain® Nano and Metro series. However, the compact design is also perfect for mounting on top of pedalboards, serving the dual role of a power supply and pedal riser. With optional converter plugs, the 1 SPOT will work with virtually ANY 9V pedal, including Line 6 modeling pedals

The most important decision you need to make when buying one of the best pedalboard power supplies is whether you need isolated outputs or not. Essentially, isolated outputs supply each pedal with its own individual power source, which removes hum from the equation – something you may experience when running digital and analog pedals together from the same daisy chain. Unless you’re only running a handful of analog units - which is highly unlikely these days - we’d always recommend an isolated pedal power supply wherever possible. Who knows how your rig might change in the future? What power supply do I need for my pedal board?The Truetone 1 SPOT is a 9V PSU that only takes up 1 Spot on an outlet strip or wall outlet.The Truetone 1 SPOT solves an annoying problem that people have complained about for years. Only takes up ONE position on your outlet strip or wall outlet. Handles from one to over twenty guitar pedals (1700mA max!) New heavy duty output cable. The 1 SPOT is the original 9V pedalboard power supply that only takes up one spot on an outlet strip or wall outlet. It solves an annoying problem that people have complained about for years, and does so with quiet, reliable performance! Line 6 modeling pedals (DL-4/MM-4) may be powered by outputs 8-11, but will also require the CL6 converter. You may optionally use output 12, as the power input of these pedals can use 9Vac or 9Vdc.