Wall Mount for Personnel Computers Universal Fit Any Pc

Product Information

Next, drill the mounting holes on the wall and the baseboard. Make sure to complete this step before attaching any hardware to the baseboard. After that, lay down every component on the baseboard and refer to the sketch you made earlier. To start off, measure your mainboard along the wall that you’ll be mounting it to. Make a rough measurement, keeping in mind that your mainboard will need enough space for all of your parts to have proper breathing room, and the coolant tubing to run through (You will still need serious cooling.) Make sure that you leave at least 3-5mm of width on each side to account for error.

For this step, it’s best to call in a friend or a family member because you will lift your entire rig in the air. First, bring out the screws you will use to mount the PC on the wall. The screws should be durable enough to carry the entire PC weight while also being long enough to go all the way from the surface of the baseboard to deep inside the wall.Dolomiti Italy Autumn Lago Antorno Landscape Photography Desktop Hd Wallpaper For Pc Tablet And Mobile 3840×2400 Second, if you’re on a budget and want to mount your existing PC case on the wall, then you can use a wall mount PC mod kit to hang your existing PC on the wall. This way, you won’t have to spend extra on another case, nor would you have to build a case from scratch. However, it also might not look as gorgeous as the first or third option. Build By Imgur User: kdevault813 With some basic carpentry knowledge, you can even make it a DIY day. Consult an expert if you want to go the distance and really make it one-of-a-kind, even Linus did. Materials

To plan the distance of your studs, which is crucial once you begin the process of mounting, use a stud detector tool to measure the length that each will have. Now we can start the process of drilling. First, if you’re using a custom case and you have not attached plexiglass, then your PC will get more dust than you can imagine, and not just dust, you will also get all sorts of bugs and insects. You can also go with a plastic baseboard. It’s relatively light, so you can easily hang it off your wall. But, the type of plastic you choose must be strong enough to hold everything. For that, acrylic can be a good candidate. It is durable, and you can easily drill holes in it. To start off, drill holes both into your wall and mainboard to line up exactly where they will mount. This goes without saying, but you won’t be able to do it after your setup is attached to your board. Metal– Steel, aluminum, and copper are your best bets here. Any kind of sheet made of these materials is great for your setup, commonly used for structural rigidity on compact PCs like laptops by all major brands. Of course, you’ll need to rework the design a bit. We’ll get to that part soon.If you want to have an RGB array, more tubing, or a couple of extra hard drives, make sure that your mainboard can support such requirements later on. Construction Of course, you will need the dimensions of your parts to get it done, but the entire setup will need more than that. The structure of your base material along with a good idea for the general construction behind it is a great start.