Martindale CP501 Classic Check Plug 240V Socket Tester, Blue

Product Information

Please follow this link for more information about the Martindale VT12 Two-Pole Voltage & Continuity Tester. Martindale PD690S Proving Unit Overview ISO12947.4—1998 The abrasion and pilling resistance testing of fabrics by the Martindale method-part 4: measurement of appearance change. Test piece of fabric is placed in the specimen clamp, and it will be rubbed against with abradant in a Lissajous figure. According to the requirement, once the test piece is broken, test piece should be taken down to calculate its abrasion resistance index, or evaluate its ratingof pilling through the visual description of abrasion. All the Martindale test data are comparable to the test results obtained by internationally renowned third-party laboratories. Martindale abrasion machine is suitable for testing the abrasion resistance and pilling degree of knitted fabrics, woolen fabrics, artificial leather, synthetic leather, etc. under pressure, which is used in many industries such as textile, footwear, and garment.

Determination of the total number of rubs per specimen when it occurs breakdown as the abrasion count. Determination of mass loss g: for fabrics intended for apparel and household textiles, excluding upholstery and bed linen, non-taking coated fabrics. This method is applicable to textile fabrics with a low abrasion wear life. The selection of abrasives, the sampling method and the selection of the specimen fixture liner are consistent with the method for determining the breakdown of textile specimens and are not repeated here. The sampleshall be cut from different parts of the whole fabric with representative. If it is a fancy fabric , the sampleshall include all the different tissues and colors presented by the cloth. Equipped with two sets of grinding heads, Martindale Abrasion Tester TF210 can do pilling tests and abrasion resistance tests at the same time.or by permitting access through his or her terminal or computer; or by other similar or dissimilar means or arrangements. The Martindale VIPD138-S Voltage Indicator & Proving Unit Kit is a reliable, practical, and durable safe isolation set. Martindale VIPD138-S Voltage Indicator & Proving Unit Kit Key Features Ideal for proving indicators and measurement devices up to 230V AC or DC in domestic and commercial applications Let the side of test clamp with test piece face down, and put it on the test clamp base. After that, the bearing axle should be adjusted until it aligns and inserts the circular groove of clamp. According to standard, we settle the number of times on the tester and turn on it. Won’t be stop itself until it achieves enough times in the measurement.

Adopt servo motor control to improve the stability of machine operation and reduce machine noise. Choosing Martindale Abrasion Tester TF210 means choosing reliable rub testing results. ISO12947.3—1998 The abrasion and pilling resistance testing of fabrics by the Martindale method-part 3: measurement of mass loss; Under a certain load, the specimen is rubbed against the abrasive in the plane of the Lissajous curve, and the total number of rubs is counted to determine the abrasion resistance of the fabric when the specimen breaks. In the standard environment, we put the test piece in the tiled state for a period of time according to different standard. For example, 24h (GB/T 4802.2), 16h(EN ISO 12947-4). What’s more, we have upgraded the Martindale tester which is equipped with IoT technology, it is a new brand “ChiuVention”,Textiles / Determination of abrasion resistance of fabrics by Martindale method, par 4: Assessment of the appearance change

If the fabric gives a result of 10,000 to 15,000 rubs, the fabric is highly recommended for use on furniture that will be used occasionally. The reason why the fabric is recommended for light domestic is that the fabric is constructed delicately or the fabric is made of delicate yarns. Pull out the fabric to be tested and load the fabric onto the lower plates of the Machine (Martindale Abrasion and pulling tester TF210). Then the abradant (the abradant can be a small disc of either worsted wool or wire mesh). The abradant is then rubbed against the specimen to be tested in an oscillating circle. The fibers are pulled out of the fabric, causing a loosening of the yarn/fabric structure. After repeated action the fibres may be pulled out, leading to thinning of the yarn and fabric, and even disintegration. Research has shown that when a result of fewer than 1000 rubs is obtained, the fabric is recommended to be used for decorative purposes (i.e accents and cushions), so therefore, this fabric is not recommended for general use.The Martindale HPAT400 Pass/Fail PAT Tester features a one-touch operating system, allowing the user to select the relevant automatic test sequence by pressing the corresponding button. He/she can set the Martindale HPAT400 Pass/Fail PAT Tester to perform automatic, full test sequences for Class I or Class II appliances or power leads. This instrument also includes an IT-safe 200mA earth bond test. Testing the abrasion and pilling of a fabric is extremely important as it ensures quality and consistency within clothing for manufacturers. The Martindale provides reliable and repeatable tests that can be used to analyse any defaults or issues with the fabric before it is manufactured. Suitable for both domestic and industrial use, the Martindale VT12 Two-Pole Voltage & Continuity Tester is constructed in accordance with the latest safety standards and features GS38-compliant probe caps. It automatically detects and indicates AC/DC voltage between 12V and 690V. The voltage range is displayed on the LED scale. The Martindale VT12 Two-Pole Voltage & Continuity Tester also offers continuity testing with optical and acoustic indication up to 200kΩ. ENISO12947.4-1998 The abrasion and pilling resistance testing of fabrics by the Martindale method-part 4: measurement of appearance change.