About this deal
Since only a small mass has to be moved, the stepper motors can be controlled with high acceleration values.
The rendering is rather clean, and the machine is relatively silent during the printing, and especially very fast! stands as the premier, top-rated curated online marketplace for 3D printers, proudly serving the community since 2015. You can recognise this printer because it has a power switch either to the rear of the device (where the power lead is) or to the front, right of the screen.When the sensor is not in use, it can be attached anywhere on the printer thanks to the strong magnets. The clamps are used to keep the limit switch wires away from the moving parts - an improvement that will surely pay dividends in the long term. I didn’t know Tomtop until now, and I was pleasantly surprised by the speed with which I received the machine, in less than 5 days from a German warehouse.
Thus, the energy consumption measurement shows that the mainboard, motors and heating element of the hotend require about 55 watts in operation, and the heating element of the print bed requires another 220 watts.It is better not to expose the hotend to temperatures above 260 °C (500 °F), since PTFE loses its strength beyond this temperature.