DEWALT DWS774-GB 216-mm 230V Slide Mitre Saw with XPS - Yellow/Black

Product Information

Despite the plus point, one would observe that other mitre saws would offer more versatile designs on the blades. However, it is easy to overlook when all the features of the DWS774 come together and make a great appliance. Cutting Potential

XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity no adjustment required. The DWS774 has a retracting blade guard for safety with a two-part trigger system. The rear lever sits between your thumb and first finger, and when squeezed raises the guard. With your hand in the correct position on the handle, the pad of your thumb rests on the trigger safety switch which when depressed allows the first and second fingers to depress the trigger. I have heard many complaints of users catching the webbing between their thumb and finger in the trigger lever, but I never encountered this issue and I don’t see how it is possible if you are holding the handle correctly. Lefties will probably found the saw difficult to operate however as the trigger safety switch is on the left-hand side of the handle and is nigh-on impossible to operate using the saw left-handed. The DWS774 also includes a material clamp which is the same standard accessory dewalt have been supplying for years with one notable downgrade. The foot of the clamp has no cushioning rubber; only a metal plate, which easily causes marks and indents in woods; plywood and softwoods in particular. The clamp can be fitted either to the left or right-hand-side of the fence, but when fitted on the first the saw cannot be lowered as the body of the motor hits the clamp.To make sure you’re using this saw in as safe a way as possible, it’s important to read all the safety instructions in the manual. Always wear the correct personal protective equipment (PPE) and never allow your hands to come within 10 cm of the spinning blade. The DeWalt DWS774 216mm Mitre Saw has a classic saw design improved and updated for the modern user. New 1400 Watt motor for powerful cutting in all materials (1400 Watt Low Voltage version UK Only) These measurements vary, and the cuts made can be sufficient for the majority of the projects. Convenience As a bonus, it’s the easiest to carry around thanks to the two big handles that also help to extend the table. I wouldn’t think twice about unbolting it from the workbench, throwing it in the car, and taking it with me to a job.

Certain features result in the vogue of this appliance and are the reason that people seek the DWS774 over all the other mitre saws. Specifications Product The pillar to which the clamp mounts drops into its mounting hole and, when rotated, cannot be lifted free. The action of the clamp then lifts the pillar up and eventually enough pressure is applied to keep it tight. This setup limits the clamp’s ability to secure thinner material, and makes the whole assembly more of a hindrance than a help. Aside from the odd situation where the clamp does come in useful, it is best left to languish at the bottom of a toolbox.The cutting potential of the DWS774 allow cuts of up to 250mm by 62mm at a 90-degree angle setup. The minimal cut made has dimensions of 198mm by 48mm at a 45-degree angle. The mitre action is as you’d expect from a brand like DeWalt, everything’s chunky and solid and the action is as smooth as butter. It’s smooth to operate, if a little stiff, but I’m sure it will become easier with use or even a bit of grease. XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the workpiece for increased productivity no adjustment required