eco-filtration 50MM THREADED TANK CONNECTOR KOI FISH PUMP FILTER PIPE FITTING

Product Information

In addition to the manufacturers standard warranty (usually 1 year) we also offer the opportunity for you to extend this warranty by a further 1 year for a one off fee. Our metric PVC aquarium / Pond solvent weld plumbing is ideal for various plumbing jobs in your aquarium or pond. This tank connector is specially designed to eliminate the difficulties while working with large water tanks.

A leading supplier of plumbing fittings, McAlpine comes with a variety of high-quality and competitive products to suit all plumbing solutions. The other end allows the pipe inside or you can connect a fitting to the outside, which should be glued with Solvent Weld Glue .The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky they last thing you want it your bottom drain line leaking after all your hard work. This PVCu Plain / BSP Threaded Union has both plain and threaded metric ends for use in joining PVC pipes and other fittings.

Jointing process - Solvent cement spigot end x BSP thread (with use of thread sealant such as PTFE tape). The connecting Solvent Weld Pipework can then be glued into place using Solvent Weld Glue for a permanent connection. This item is 100% compatible with other DIN specification metric solvent weld PVC pressure pipe parts and BSP (British Standard Pipe) PVC threaded parts. At EasyMerchant, we’ve got a massive range of cheap mdpe pipe and mdpe compression fittings to suit any trade or DIY need.

Threaded Tank Connectors provide a secure, watertight way to connect Solvent Weld Pipework through the side wall of a filter box or water tank. Simply glue over the end of the solvent weld pipe before fitting to the appropriate valve or fitting. The Threaded Tank Connector has been designed like a socket/joining bush, allowing for a rigid pipe to be solvent welded on either side of the connector.

Black Waste Threaded Tank Connectors are unique in that they accept the same size Solvent Weld Pipe on either side of the fitting. The Pvc Metric Pressure Pipe Tank Connector / Bulk Head must be intact, and in complete resalable condition. These Elbows/Bends are great for joining two sections of pipe at a 45 Degree angle with limited friction loss. Please note that we try to give general advice, this may not be specific to your spa or hot tub so please always check with the equipment manufacturer first. We are a specialist company dedicated to the supply or supply and installation of high quality professional irrigation equipment.

They may use a number of different methods to work out whether multiple devices appear to be used by you, including matching information about your devices, browsing activity and geo-location. Black Waste 90 Degree Bends should be used in conjunction with Black Waste Solvent Weld PVC pipework. Most products are made in Europe and are made from high quality materials suited to industrial environments. All fittings and pipework have smooth bores which aid in good flow characteristics and resistance to abrasion. Again, hand tight is fine for pipes up to a size of 40mm – but for anything bigger, you’ll need to use a pipe wrench to make sure everything’s tight.

First, you should tidy up the cut you’ve made on the MDPE pipe – and it’s a good idea to chamfer the end if you’re working with a pipe over 40mm in diameter. Demountable Unions are ideal for positioning before and after Pumps, UVC’s and Filters to allow them to be easily removed for maintenance or replacement. Black Waste pipe and fittings are strong and durable and will provide a permanent connection when secured with Solvent Cement.The flange tank connector is supplied with self-tapping stainless steel screw, the self-tapping screw can be used with tank/liner thickness of up to 5mm. An extended warranty is an easy way to protect your purchase, against any manufacturing defects causing breakdown. As well as the options provided below, you can choose to restrict or block cookies through your browser settings at any time. With the connector fitted, you can now join an MDPE pipe to the connector in the same way you would with any other compression fitting.