Bona Traffic HD Silk Matt 4.5Ltr

Product Information

The chamfer profile is widely used in furniture, cabinetry, and architectural applications, offering a sleek and modern look while maintaining the natural beauty of the wood.

Widely used in hotels, restaurants and airports, where maximum durability and a short downtime is essential. Overcoating - 1-2 TrafficKeep in mind it's not recommended to apply more than two full coats per day, due to risk of excessive wood swelling. This profile allows for a tight, secure connection between the two pieces, creating a strong and stable joint.The situation is worsened if the base paint has not thoroughly dried and moisture is trying to migrate out through the glaze. Shake the Traffic HD can and add one bottle of Traffic HD Hardener; immediately shake the mixture thoroughly for 1 minute and then insert the enclosed filter. Used in hotels, restaurants and airports worldwide, where short downtime is essential, it is a wood floor lacquer perfected. Bona Traffic HD is a very tough, hard wearing lacquer for wooden floors in public areas with a high level of traffic. The product has a very low odour and has received DIBt and GreenGuard approval for its low indoor emissions.

Bona Traffic HD is one of the world's toughest and fastest drying lacquers for wooden floors exposed to extreme wear, allowing full traffic to be resumed in just 12 hours. Allow varnish to reach room temperature, insert filter and shake the container thoroughly before use. For Preparation of previously lacquered floors: Bona Traffic HD Anti-slip has in general very good adhesion to factory pre-finished and previously lacquered floors, but the surface must be carefully cleaned and abraded prior to overcoating. Allow at least 3 days for the product to fully cure before laying carpets, rugs and moving furniture. The result is a beautifully rounded edge that enhances the overall aesthetic of your woodworking project.This profile involves interlocking pieces of timber with a tongue on one edge and a corresponding groove on the other, creating a tight and secure connection. This product has a very good adhesion to factory pre-finished and previously lacquered floors, but the surface must be carefully cleaned and abraded prior to overcoating.

With a double chamfer on the thickness, both sides of the timber are bevelled, creating a symmetrical and eye-catching design.

In certain cases, we may not be able to do this as couriers have a maximum parcel size that they will allow. We also provide technical advice, repair services and training for floor sanding professionals in the UK. Floor product is excellent the only down side was the web site calculations of what was actually required to cover the floor was way out,. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.

It has to be noted that if the previous layer of lacquer has been allowed more than 24 hours of drying time, then an intermediate sanding is always required. Roll with a smooth, flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Ensure that floors to be varnished are clean, dry and free from all traces of dust, dirt, grit, oil, wax and any other surface contaminates before application. The result is a beautifully rounded edge that adds elegance and refinement to your woodworking projects. Where there is a risk of sidebonding, Bona Prime Classic is recommended for the initial coat on bare wood.With a double chamfer, both edges of the width are carefully bevelled, creating a symmetrical and elegant look. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Even though the stairs had been given a light sanding, this new anti-slip varnish refused to adhere at all and rolled off in little balls.