Osmo Decking Oil Colour: Grey 019 2.5 litre Tin

Product Information

Comparing them to Osmo with similar colours and have chosen to go with the Carbodeck as the quality and colour seemed to match but Carbodeck are much cheaper. Water repellent, extremely weatherproof and UV stable, it will not crack, peel, flake or blister and you can simply recoat without sanding or priming. g. decking), we recommend checking the finish at least once a year and to eventually recoat the surface with the appropriate finish. To make application a quick and easy process, we recommend that you use a stiff brush like the Osmo Flat Brush or a lint free cloth like the Osmo Fleece Applicator with Hand Holder, applying thinly and evenly to the clean and dry wood surface along wood grain.

For a quick and easy application, we recommend using Osmo 150mm Floor Brush which was tailor-made for decking and allows you to apply the finish while standing. If possible, and if the wood is absorbent please apply the first coat to all sides before installation.We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. For all other ingredient-rich hardwood species not mentioned may require a varied period of exposure. Osmo Decking Oil is a translucent, satin finish oil for all wood in outdoor areas but in particular, is best suited to protect and maintain timber decking, garden furniture and privacy screens. Exotic oil rich timbers including Cedar, Iroko, Mahogany, Teak etc must be left to weather for 12 weeks before application.

weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner which acts as a degreaser. For quick and easy application, we recommend using the Osmo Floor Brush with the Osmo Telescopic Handle.Used Osmo Decking oil grey 019 to give our garden sleepers a more contemporary look from golden to grey. Exotic hardwoods such as Balau (Bangkirai) or Teak with a high oil content should be left to weather for 3 months(5 months in winter), this timespan can be shortened by wiping over with methylated spirit to degrease the surface prior to application. It’s different from other decking oils because it adds a touch of colour to the deck while still allowing the natural grain of the wood to show through. These colours are only intended as a guide and it is your own responsibility to ensure you have picked the correct colour. Repeat this process until the droplet of oil sits as a bead on the surface of the wood and no longer soaks into the timber.

It’s also important to apply the oil evenly, using a suitable brush, and to allow each coat to dry fully before applying the next. Decking treated with Osmo Decking Oil 'clear' will therefore be susceptible to the natural grey / silvering of the timber over time. They know what it comes down to in terms of wood products and finishes so you can benefit from over 100 years of our experience. Regular Cleaning: Damp cleaning with diluted Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Osmo do not recommend cleaning decking with a power washer as this will damage the surface of the wood, open up the cell structure of the wood and lead to very significantly worse coverage.I got to the bottom of the first tin and found all the colour was concentrated at the bottom, which I couldn't use, as it was too different from what I had just put down. If the decking finish starts to look worn or tired over time because of heavy foot traffic or weathering, simply apply a fresh coat of Osmo Decking Oil following the Preparation and Application instructions above. Osmo Natural Oil Woodstain can also be used for decking but is not as hard wearing as the decking oil, so should only ever be appled as a single coat and then over-coated with Osmo 430 Anti-slip decking oil.