Trend Anglefix Miter Guide for Quick & Accurate Mitersaw Angle Setup, Red, ANGLEFIX, 16.5 x 31cm

Product Information

The heavy duty aluminium extrusion fence has also been updated and is now 24” long, 2 ½” tall and can be extended to a massive 42“. I do not know how feasible it would be, but I wonder if mitre gauge manufacturers could make the fence and protractor with a detachable bar, and then make a selection of different size bars to fit the non standard mitre slots. Even using the non standard angles, or the ones in between the notches where the indexing tooth is not used it held firm and fast no matter how many cuts I made. INCRA Mitre Sliders are the greatest shortcut ever invented for getting a sled or other fixture tracking perfectly through a miter slot. The most commonly used angles have an indent drilled into the underside of guide bar, and eight of these are 45+, 30+, 22.

This is especially useful when fitting skirting boards, coving and dado rails, as these can be sawn to the exact angles required by the installation. Now come on, these companies know that 99% of aftermarket accessories are made to fit the standard 3/4”x3/8” slot, so why the hell would they cut a different size slot in their machine and then only produce rubbish accessories to fit it?Also like the Incra the EB-3 has a label on it which tells you what angle to set the gauge for say a ten sided frame. To get at the fourth disk I had to remove the large black clamping knob and disengage the indexing tooth from the protractor. Finally if the gauge is not set at 90 degrees to the blade you have to adjust the faceplate which is connected to the protractor with 4 screws.

We offer power tools with high performance, flexibility and a comprehensive range of spares and accessories for all woodworking trades.oh and I need to add, that the saw table work surfaces are fairly small, at 37 x 37cm and 35 x 42cm respectively. The “Glidelock” arrives with 3 white washers/disks fitted down the left hand side and 3 black ones fitted on the right, and both sets are held in with grub screws. I say modify the saw because I have read that some owners have gone to such drastic lengths as to have their mitre slots re-cut to the standard size. As you can see it comes well packed, and along with the gauge the box contains 3 bags of parts which are labelled with their contents. INCRA even designed interlocking grooves in the arms and fence so that a sharply mitered workpiece can't slip behind the stop to give.

As one of the largest and longest established independent tool retailers in the UK we supply professional power tools, hand tools, machinery and accessories.If the gauge is too tight, then you can cure this by turning the disk screws anti-clockwise direction. The Delphin knife is the most popular knife among floor fitters for its unique shape and durability.