Angler Fish Adult Fancy Dress Costume

Product Information

For the light I used a battery powered blue LED string passed through the hollow ski pole and stuffed inside the ball. You can use any kind of LED bulbs for this, but I wanted the light to rotate through the color spectrum. The extra lights we balled up and ran down the center antennae for the bright Angler bulb in front of that sinister mouth. I didn't have time to put together a proper head support mechanism, despite the fact that I thought long and hard to try to figure out what I was going to do to support it on my head.

Each project begins with a passion for true quality–embroidered patches, faux fur cut with care, and hand-selected fabrics that are as durable as they are comfortable. In the second image I have cut out holes for the eyes and I am about to tie in the last section of the belly with the lower jaw. By this point I have also covered part of the lower jaw with grey poly foam to give textural continuity with the belly instead of with the head.On both the inside and outside of the hole that the cable runs through I glued in T-bolts to prevent the cables from slicing through the foam. It even has a little light up doo-dad (we’re told the correct term for that thing is actually the esca or illicium). Personalised advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out. Be sure to cut the jaw large enough to both get a head through to put the costume on and to make a big mouth for the large teeth. These 4 or 5-star reviews represent the opinions of the individuals who posted them and do not reflect the views of Etsy.

The fiber optic strands were too thin to use singularly so i bunched 7-10 together and fed them through the hollow needle. Etsy’s 100% renewable electricity commitment includes the electricity used by the data centres that host Etsy. The poly foam body was glued on the inside of the head and I left a small section in the back unglued to make it easier to get in and out of. I glued after my spray painting and had to spray paint again because the lights were white and I got some glue on the painted cardboard. Of course, if you’re the kind of person who likes that sort of creepy deep-sea marine life stuff, then perhaps this light-up Jawesome hat is right for you.When all the cables have been glued in place you will need to gather them into bunches on the inside of the suit. Set up a fan and use an appropriate vapor mask- I'm confident that burning polystyrene is bad to breath. Also, you're going to be making cuts to the mache, so you'll inherently weaken the overall integrity.

The same philosophy applies to building the body of the fish- without a form to build around poly foam is very difficult to work with. Reddit and its partners use cookies and similar technologies to provide you with a better experience. Turning off the personalised advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive. Read more about the condition New with tags: A brand-new, unused, unworn and undamaged item in the original packaging (such as the original box or bag) and/or with the original tags attached.This point is very crucial - you have to make sure that there are no serious weak spots on your paper mache-ing. For a more dimensional touch, I installed a second, smaller hemisphere painted black inside the main eye.

In the cold and midnight waters of the deeper ocean, a flickering light can often be seen glowing as gently as a firefly. Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. The dimensions of this bottom armature were taken from the actual size of the fish's head that was already built. Since it soaks up so much paint a brush will go dry in a single stroke and it takes forever to cover. This is critical because the paper will have to withstand some abuse from people patting your head, spilling drinks, people trying your head on, and others.Semi-sheer black fin panels are sewn between the body and the upper arms of the fabric-spiked sleeves. Eventually the pores in the poly foam close and you can get a nice gloss surface- which was important for the fishy quality I wanted from the skin. Use the needle to puncture the EVA foam, then push the bunch of cables into the skin and remove the needle without removing the cables.