Rycal Block Paving and Concrete Sealer 20Ltr

Product Information

In the unlikely event you receive goods that are damaged, the courier note must be signed DAMAGED for M.

For more than 15 years this product has been used under and Adseal's own and a variety of other 'own named labels' to seal the nations driveways, paving, car parks, forecourts, pedestrian walkways, etc. I applied the sealer with a brush but found that using a cheap pressure sprayer was more effective and efficient. Application of this type of block paving sealer is by watering can or sprayer combined with a squeegee.

Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If you are looking for the maximum stain resistance and longevity, then our urethane sealer is the most appropriate product. If you are looking for a more wet look finish our sealer for block paving in the gloss finish is the right product for you. If you want the sanded joints between the gaps in the paving to be set solid, then work on low coverage rates for the sealer of about 2 m2 per litre. We now supply three different types of block paving sealers all of which offer several and varying benefits.

The use of a squeegee during application will force the sealer deep into the sand between the blocks creating long term joint stability. The results were more than I expected, there was a mixture of new and old patio slabs and K-Seal provided a uniform final finish to them all. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. If you require a even glossier finish, if further coats are applied, the paved surface will become shinier and shinier.If you want to prevent the surface from becoming slippery, we recommend mixing the treatment with silver sand or builder’s sand. The sealer needs to applied in thin even coats to ensure maximum durability and no issues with the coating.

Multicrete Products Block Paving Sealer High Gloss is a high quality Acrylic solvent based clear sealer, designed to enhance and protect Concrete Block Paved areas by repelling water, dirt, oil and fuels. Thinners aren't required with this product, use white spirits or proprietary brush clear for cleaning. Having no way of using a pressure washer, I scrubbed down them twice using plain water with a squirt of Fairy liquid. If efflorescence (surface whiteness) is present, proceed as stated in the 'New Paving' section above.

An annual treatment of the paving with fungicidal wash and gentle power washing is recommended in most cases. Acrylic based solution that provides a tough, long-lasting polymeric seal on concrete stone and brick surfaces. Applying the coats in thin fully rolled out coats will prevent any issues and speed up drying times. Solvent No2 is a versatile solvent thinner which can be used for thinning a variety of oil based paints, coatings and sealers. DESIGNED TO ENHANCE THE APPEARANCE OF BLOCK PAVING – Resiblock superior gloss is a urethane-based, low-viscosity block paving sealer that enhances the natural brick finish and enriches the colour.

Kingfisher K-Seal Total Paving Sealer should be applied neat without dilution by either brush, roller or sprayer. It’s done a great job but obviously at that rate of coverage it works out expensive but I would certainly use again. We are a UK based company that prides ourselves on manufacturing and supplying high quality sealers to the trade and UK public. All work should be carried out in conjunction with the manufacturers current technical data sheet and instructions for use. Our block paving sealer- matt finish will initially leave the surface of the pavers with a mild sheen, but after a few months the sealant will weather to leave a virtually invisible seal on the surface.

Luckily, Kingfisher have you covered with a brick driveway sealant that will enhance appearance and resistance.