Yinke Hard Case for Sony WH-CH520/510/ JBL Tune 510BT Headphone, Travel Protective Cover Storage Bag

Product Information

Alternatively, search for 'Bluetooth' using the search tool located in the taskbar, as shown in the screenshot below. Tap Disconnect to disconnect your device but keep its pairing information, or Forget to delete its pairing information. When you meet a new person, you usually introduce yourself first and exchange basic information. You won’t have to do this again the next time you meet your new acquaintance - unless you forget who they are or vice versa. Also, there’s a limit to how many Bluetooth devices you can pair. Most smartphones can save Bluetooth pairing information for up to eight devices. That limit means your phone will delete the oldest pairing information if you try to pair a ninth device. Tap on the gear icon next to the device you wish to Disconnect or Remove (forget its pairing information).

I can’t pair devices: make sure the Bluetooth profiles of your devices match What is a Bluetooth profile? NOTE: For how to enter the pairing mode onyour Bluetooth device, refer to the manual supplied with the product. You can usually find everything you need to know about Bluetooth and your product in its manual. To find your online manual, follow these steps:Hold it close to the NFC logo (e.g. left headphone cup on WH-1000XM4). You don't even have to power on your headphones. They will turn on automatically. If there is still no audio, try pairing the headset or speakerto another computer or to a cellular phone that has Bluetooth audio streaming capabilities and supports the Advanced Audio Distribution Profile (A2DP). Although uncommon, it’s possible that two devices are successfully paired, but refuse to connect. If you’re sure this is not caused by a low battery level or a mismatch of Bluetooth profiles, delete the pairing information and pair the devices again to solve this glitch. You can delete ( Forget / Remove device) Bluetooth pairing information in your phone’s or computer’s Bluetooth menu. Press the Windows Key on the computer and type " add bluetooth device". On the right hand side, select the Settings category. NOTE: If you Forget a device, it will no longer appear under ' Previously connected devices'. You'll have to tap ' Pair new device' to pair it again.

NOTE: For how to enter the pairing mode onyour Bluetooth device, refer to the manual supplied with your product. The Bluetooth device you’re trying to connect to may not show up in the Bluetooth list if it’s already connected with a different device (e.g. a relative's phone might already be connected to your speaker or headphones without you noticing). You need to disable that connection first. Once the computer detects the device, it will then automatically proceed to installing the driver, after which the device will be added to the computer's list of devices. Turning Bluetooth OFF and ON again is especially useful when the device you want to connect to doesn't appear in the Bluetooth menu list. Turning Bluetooth OFF and ON again refreshes the list. This tip applies to smartphones, computers and TVs.Type your search word (e.g. ‘Bluetooth pairing’) in the search bar in the top left-hand corner, as shown in the screenshot below. With many Sony Bluetooth devices, activating pairing mode is done by pressing and holding the pairing/power button on your device for about 7 seconds. You will often hear an audio cue or see a blue flashing LED to inform you that your device has entered pairing mode. Your device will remain in pairing mode for a few minutes and will turn itself off if the pairing procedure isn't successful. For more information, visit the article: What’s the easiest way to pair my Bluetooth headphones with an Android phone?

Many new Bluetooth devices (e.g. wireless headphones) automatically go into pairing mode the first time you turn them ON. Your device becomes discoverable on its own. At this point, your device doesn’t have any pairing information saved. However, when you pair a second device, you must manually activate pairing mode. Your device won’t enter pairing mode automatically, unlike the first time. Some devices (e.g. the WH-1000XM4 headphones) can simultaneously connect to two Bluetooth devices. This is called a ‘multipoint connection’. For more information, visit the article: Connect the WH-1000XM4 headphones to two devices (multipoint connection). Bluetooth pairing is similar. When two Bluetooth devices are pairing, they exchange information. They establish a connection and recognise each other in the future without any introduction - unless one device forgets the other one or vice versa. NOTE: This process can take up to 15minutes. Do not turn off or restart your computer during this process.

What is Bluetooth pairing? 

Some TVs support Bluetooth remotes, but not Bluetooth headphones. The headphones need a different Bluetooth profile than the remote control.

However, according to your headphones / speakers setup, you might not hear sound coming from the headphones/ speakersyet. If that's the case, go through the following additional steps below to set them as the default speakers. The Bluetooth profile of a device determines what Bluetooth devices it can communicate with and how this communication is done. Take these two examples: Use the index on the left to navigate the Help Guide or select the search result which answers your question on the right.

Bluetooth pairing will occur, or the Bluetooth connection will be activated if you’ve previously paired the devices.