WAGNER Universal Sprayer W 690 FLEXiO - Electric Paint Sprayer for dispersion/latex paints, varnishes & glazes - interior and exterior usage, 15m²-6 min, 1800 ml/800 ml capacity, 630 W, 3.5 m hose

Product Information

Transfer all your kit into the space you will paint in, along with one of the cardboard sheets and the damp cloth Yes, the Flexio series are indoor and outdoor sprayers. Can I spray the ceiling with the Flexio series? Whether you are painting walls & ceilings or furniture etc there are 4 key phases to getting pro results - Prep, Dust Control, Painting, Clean-up Wagner Universal Sprayer W 690 FLEXiO 240V is part of the Wagner FLEXiO sprayer range and suitable for small to large jobs. To be used with emulsion and latex paints for indoor use. When used with the supplied Standard spray attachment, also suitable for water-based and solvent-based enamels, varnishes, protective wood-staining products, oils and many other materials.

Once mixed, take your viscosity jar (You did get one right?) and dunk in into the paint container to the top. Pull it out and start counting Bicycles, boats, garage doors, garden sheds, garden furniture, fences (wood and/or metal), overhanging roof projections (for example, eaves). The Flexio 570 and 590 are handheld sprayers in which the turbine is held in your hand. The Flexio 570 comes with the iSpray attachment, the Standard spray attachment, and is a two speed (hi and lo) sprayer. The Flexio 590 also comes with the iSpray attachment, the Standard spray attachment, and has 9 speed settings. The W200, Flexio 950, and Flexio 890 are bleeder guns. With a bleeder gun air flows continuously; the trigger only starts and stops the paint flow. The W890 has a switch on the hand-piece that can turn the airflow on and off as well. What is the iSpray attachment used for? The main feature of this type of paint sprayer is that it draws the paint directly from the container. This allows faster working with lighter equipment, making the whole process more convenient, especially when it comes to painting above your head. The supplied attachment must be used for lacquers and stains. It has an 800 ml reservoir which is ideal for fast and easy completion of small items, such as furniture. Each fully-filled reservoir is good for approximately 5-6 m²of lacquer or stain.

What Users Say About The Flexio 690

The Flexio 890 has a 3.5m air hose, with handy storage within the case. It comes with the i-Spray attachment and Standard spray attachments. Now start cleaning with the bottle brushes and scouring pad. The gun should look like new when you are done Be logical where you start and finish. Think how spraying one part might over spray another vertical part and that might cause runs For projects that demand a precise finish, such as intricate woodwork or corner moldings, switch to the included Detail Finish head. This sits upon a compact 0.85-quart (800 ml) container, allowing you to squeeze the gun into areas where space is limited. Enjoy it! This makes painting fun and it is incredibly satisfying to see the quality of the finish you can get.

However... and the however is a big one... the reason the pros cost so much is because spray painting well is *hard* and takes a ton of prep and loads of practice. If you aren't prepared to put in the time & effort to learn this, then do yourself a favour and don't buy this (or any similar) product. If you are prepared to make the effort, then the results can be spectacular and well well worth it. Secondly, diluting paint can very subtly change the shade (especially dark shades), if you need to revisit and touch up you'll want exactly the same mix. If you’re completing medium-to-large home spraying projects, you need a machine with more grunt and coverage capacity that a handheld unit can provide — the Wagner FLEXiO 690 may be the solution. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. Targeting the demanding DIYer, this HVLP (high-volume low pressure-sprayer) features a floor-standing three psi turbine to take the weight out of your hands and reduce fatigue during extensive jobs

Make sure you point the suction hose in the container the right way. Eg. painting a ceiling point it towards you etc Sweep and thoroughly vacuum the room/area, especially at wall/floor junctions and in between floorboards etc

Fill your last container full to max with clean water. (this is why you want 3 containers, one for paint, one is dirty, one has clean water) and attach the gun. Spray the clean water through the gun until the spray is just clear water. Repeat this until it is. This will depend on which front end is being used, along with the specific coating and temperature conditions.

The spray will land on *everything*, you must mask and/or seal anything you aren't painting. This includes around/under door frames and other voids. You will need to dilute it to spray. The turbine is *not* powerful enough to spray paint directly from the can. The exception here is something like Polyvine Decorators Varnish which is almost like water.