Official VOOPOO ARGUS P1 Pod 20W Vape 800mAh Battery E Cigarette Coils 2ml Pod Green (No Nicotine,No E Liquid)

Product Information

The tank is also easy to fill with the handy top fill design that allows users to unscrew the top of the tank to expose a large filling port. In addition, all the Fireluke Solo tank parts can be detached to ease cleaning and maintenance. Other notable features include an innovative parallel mesh structure, military-grade SS904L mesh, and a newly upgraded tea fiber cotton formula. UWELL Valyrian 2 PRO I tested both pods with 50/50 20-24 mg nic salt juices. I started with the 0.7-ohm pod, and for coil life, I got around 12 mL. The average on a device like this is between 10-15 mL, so this fall right around the standards. The flavor was great for a pod system though. I got 20 mL out of the 1.2-ohm pod, which is above the category average. Flavor was at a similar level. Always buy your battery products from a reputable company, such as Vape Shop, who can offer you quality assurance and safety. The flavour delivery was absolutely phenomenal in my eyes. I know VOOPOO has stated that they use ITO Atomisation technology to achieve an intense flavour delivery and perfect MTL inhale. Well, I can say that they weren’t lying! I am more of a sweet e-liquid user, which can hinder the coil life, as opposed to using a menthol flavour; however, the coil life wasn’t noticeably affected that much - the pod still lasted me a considerable amount of time. Charging times on the Argus P1 are really impressive. Using the supplied cable and charging it from a standard 5V/2A power source fully charged the P1 in under 18 minutes.

Throughout my time using both the pods supplied with the Argus P1 kit, there was no evidence of any leaks. When re-filling the pod each time, there were still no signs of condensation around the bottom of the coil or in the pod recess. The flavour is extremely satisfying. I got plenty of sweetness from the Lemon. The bakery elements are fantastically reproduced.Lithium Ion batteries are safely used in millions of devices around the world, every day. As with most high energy devices, there are various risks that users should be aware of when using them. Batteries can pose a fire risk when, over-charged, short-circuited, submerged in water or if their casing is damaged. Although many Lithium Ion batteries are protected, therefore it is vital that you still take the following precautions, as the protection circuit is a potential safety mechanism as opposed to something that should be relied upon. What are battery mAh and amps?

The pods' lifespan will depend on a couple of factors, mainly what e-liquid you choose.The safest bet is the 0.7ohm as that will handle most 50/50 e-liquids you throw at it included the over-sweetened ‘ice’ disposable style ones.The 1.2ohm is more suited to less sweetened e-liquids. The GENE AI 1.2 chip is capable of adjusting power by sensing each puff automatically. Since the device relies entirely on auto draw the chip automatically detects draw strength and calculates an appropriate wattage to suit. The wattage range of the Argus P1 is 5W to 20W and is not physically adjustable but the Gene AI 1.2 chip adjusts the power by sensing the strength of your draw. Equally the wattage is auto selected depending on the type and resistance of the pod that’s fitted. Two different resistance pods are supplied with the kit: a 0.7 ohm and a 1.2 ohm. These pods are re-fillable but have fixed integrated coils so are NOT replaceable.Thanks to its small size, the Argus P1 kit is significantly portable and caters to those who often vape on the go. The dimensions are 75mm x 50mm x 20mm (rounded up to the nearest whole number), and the kit has a low weight of 72g. When holding the device, it feels slightly weighty; however, I wouldn’t say that it was anywhere close to being heavy. On infrequent occasions Next Day Delivery can be affected by operational issues with our partners and may arrive later than planned. We cannot be held responsible for operational issues with our partner services, but will operate in line with their policies in such an event The VOOPOO Argus P1 comes with two pods, one with a 0.7ohm resistance and the other with a 1.2ohm resistance. As the P1 uses the Argus series of pods, it should be compatible with any other pod from the same range, allowing you to use them interchangeably. Additionally, you can buy Argus pods with the coil built-in or empty ones that utilise replaceable coils - this appeals to all types of users as it gives you the leeway to customise your personal vaping experience. With rounded-off edges, constructed with durable metal and all topped off with a high gloss finish, the Argus P1 kit truly feels like a work of art to hold in hand. An adjustable airflow mechanism is located on the side of the device, allowing you to tailor your vape experience to your exact needs. The Argus P1 Pod Kit is a modern designed and super compact pod kit from Voopoo, showcasing a host of power and customisation features in a cutting edge zinc alloy and polycarbonate body. The kit houses an impressive 800mAh battery that puts out 5-20W of power.

Aside from the obvious style change, the main difference between the two is that the Argus Pod has a screen with adjustable wattage, this isn’t as useful as the Argus P1’s auto-power function.I usually always prefer a screen and adjustable wattage, but in this case I would choose the P1 due to this. Performance This silicone rubber flap is attached to the pod by a small rubber pin so there’s no chance of it getting lost. It can be twisted sideways when you’re filling to give a little more free room. Because the fill port opening is only 4.5mm wide, care should be taken when using larger e-liquid/shortfill bottle tips.The Argus P1 is compatible with VooPoo Argus Pods—two of which come included with the kit. The Argus P1 comes standard with 2 super-smooth, leak-proof refillable pods with built-in coils—one with a 0.7Ω (ohm) mesh coil and one with a 1.2Ω (ohm) mesh coil, perfect for 50/50 E-Liquid and nic salts. Included with the kit: Thanks to inhale activation, you can just take a puff on the mouthpiece to vape and the Argus P1 will automatically create a discreet amount of vapour to deliver an MTL vape. This style of inhale imitates the feel of a cigarette, which is ideal for first-time switchers. The kit’s GENE. AI 1.2 chip automatically adjusts the output of your vape to match the strength of your draw. There’s also an adjustable airflow control on the side of the device that allows you to switch between a tighter or looser draw. If you are experiencing difficulty verifying your details via the instructions sent to you, please follow the guideline below to verify your details;