Joined in 2023 
82 
63 About this deal
Highest quality, fibreglass rod radially reinforced construction for strength and reliability during cable installation Fremco Duct Rod Pusher, designed in conjunction with Mills Limited and utilising all the reliability of the larger Fremco Fibre Blowing machines, this is a quality duct rod pushing machine designed to assist in rodding operations, and capable of effortlessly pushing continuous rod from 9-25mm diameter with typical distances of up to 300 metres.
The unit is mounted on a sturdy, anti-corrosion treated tubular steel frame, and powered by a strong hydraulic unit (not included) capable of delivering up to 200kg at a speed of 80 metres per minute (for safety reasons we recommend max speeds of 30 metres per minute.) The hydraulic control lever has adjustable torque, distance and speed measurement for complete rod control.For additional safety considerations, the unit has a clamp assembly which allows subduct to be securely fixed between the rod pusher and cobra. Second, Until all preparations are completed, the fiberglass duct rodder can be used to thread. First thread the of one end of the rod into the wire tube, then pull the wire rope at the other end of the duct rodder. In this project, it is necessary to ensure that the rope is unobstructed in the wire tube and that it cannot be bent in the wire tube, to fear that it is difficult to carry out threading work in the following. The toneable duct rod has an 18 AWG copper wire, almost twice the size of the competition, in the center of the fiberglass core. The copper wire is also connected to the end fittings so the transmitter leads can make a direct connection to the copper wire. The female end fitting provides the attachment point for the transmitter’s lead connection. The other transmitter lead is connected to a stake driven into the earth. The direct connection of the signal to the copper wire provides the most effective method of signal transmission.
The duct rodder was mainly used for the traction of the wall at the earliest time, and later developed into the sewer’s optical cable and the traction of the line. The cable duct rodder has the advantages of saving time, saving labor, improving work efficiency, etc. It can be used for telecommunication pipeline cleaning and laying of optical cables, cables and plastic sub-pipes. When it is used, the fiberglass mandrel shall be led out from the guide wheel first, then be connected with the corresponding metal head and penetrate into the pipe. When used for cleaning, the guide head can drive the cleaning tool to clean the pipeline; when laying the cable, it can be brought into the steel wire or iron wire first, and then the steel wire or the wire traction cable can be used to enter the tube.Sometimes it is broken. We need duct rodder accessories to replace. 2.How to use the fiberglass duct rodder steps
Clearance Items
Duct rodders enable the safe and efficient ins tallation of electrical cables and telecommunication lines through conduits - duct rodders also enable the location and cleaning of underground ducts, threading lines and pulling cables. Diameter - Duct Draw Rope - 220m Blue Polypropylene - Supplied as Reel - Weight 3kg - 20cm x 11cm - (106-1-2) Duct Rodding Systems (often referred to as Cobra Rods, Conduit Snakes, Duct Rods or Conduit Rods) provide a compact and labour saving solution whether installing cables in ducts, threading draw ropes through underground pipes or surveying drains with CCT V cameras. Duct Roddersare a more cost-effective solution to using traditional screw together type drain rods. The Duct Rodders are manufactured from the highest quality fibre glass, withradially reinforced construction available in a choice of diameters,mounted on rugged and robust zinc plated steel frames. Stanlay duct rodders have been used in some of the largest telecom projectsworldwide for installation & maintenanceof hundreds of thousands of kilometers of optical fiber cables in buried ducts. Furthermore, traceable roddersare fast gaining wide acceptance as the means & method for maintenance of outside plant telecom duct networksand fiber optic cable installationnetworks. First, When installing the dark line, before the threading, lay out a reasonable direction of the wire line pipe, the elbow is best to bend with the bender, fixed line pipe and we will also carry out the next stringing work In the pipeline. One point to emphasize here is that at the bend of the pipe, a special pipe bender should be used to bend it; otherwise, it would be difficult for the wire to pass through here.
Great Deal 
New Comment