BIQU Orbiter V2.0 Extruder, with Double Gear Direct Drive

Product Information

We are going to divide the print head into two parts, depending on the type of print head these parts can be more or less integrated or separated: ender3 - BMG using orbier 1.5 mount/BMG mount for orbiter1.5 mounting holes/Left Side Motor/BMG to Orbiter 1.5 mount - one piece - use supports.stl EZ Drive Easy Driver EZ2209 EZ2208 EZ5160 Pro EZ2130 EZ6609 EZ2225 EZ2226 for SKR 3 EZ Control Board

Afterburner is not specifically an extruder, but the collective name for the Voron direct-drive interchangeable toolhead system. The Afterburner system has three interchangeable components: the extruder, the toolhead holding the hot end, and the cooling assembly. Each of those can be swapped without affecting the other components. BMG, we would choose to suggest this type of extruder if our machine is bowden and the one our machine has is not very good quality. ender3 - BMG using orbier 1.5 mount/BMG mount for orbiter1.5 mounting holes/Front Motor/BMG to Orbiter 1.5 mount - one piece - use supports.stl Some of our products may be more expensive than others,but please believe in our quality and believe that you will not regret when you receive the goods. Nov29: Sherpa mini version (bltouch version and swappable probe version ), will work on ender3/pro/v2/cr10

 Secondary drive gear

Our 3D printers have an assembly inside the print head called an extruder. This set is made up of various components that will allow the processing/movement of the filament, and today we will focus on the best extruders on the market.

Greater weight in the assembly that can cause problems in the kinematics if the chassis/kinematics assembly is not properly adjusted. Stainless steel filament exit guide with 0.2-0.3mm clearance to drive gears for best TPU printing experience and extreme wear resistance when using abrasive filaments Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown. Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown. Numerous small changes to improve mechanical accuracy and design aesthetics: These minor improvements collectively contribute to the product's overall quality and visual appeal. I recommend getting the Trianglelabs Matrix for large format 3D printers who already have a quite heavy heatbed. For example, I would choose this for an Artillery Sidewinder X1, Genius, or a Creality CR-10.

Customer Reviews

ender3 - BMG using orbier 1.5 mount/BMG mount for orbiter1.5 mounting holes/Front Motor/BMG to Orbiter 1.5 mount - 2 of 2.stl

Nov26: tweaked filament sensor AIO (All in one, no mount needed, screws directly into your extruder), and added "AIO large" to use the larger pneumatic fitting. Measure two flat edge of the nut on the pneumatic fitting: 8mm use the AIO, 10mm use the "AIO large" version (the top threads remains 6mm). There are other pneumatic fitting that may not work with it. I would recommend getting the Orbiter extruder if you like tinkering with your printer and want to use a direct drive extruder which is open source. extra stuff/BMG mount for orbiter1.5 mounting holes/Left Side Motor/BMG to Orbiter 1.5 mount - 1 of 2 - heat insert M3 x L 4 x OD 5.stl

  Orbiter v1.5 Summary

BMG mount for orbiter1.5 mounting holes/Front Motor/BMG to Orbiter 1.5 mount - one piece - use supports.stl

Machined PEEK secondary drive gear sleeve: Precision machined components contribute to smoother filament feeding and improved reliability. The Orbiter V2.0 features Bondtech-quality hardened dual drive gears, shortened to 11mm, that grip filament from both sides. The gears have been reversed, which means the filament path is now closer to the extrusion center. Changes to the motor design contribute to the Orbiter V2.0's approximately 40% higher extrusion force and better acceleration performance compared to the previous V1.5 version.BMG mount for orbiter1.5 mounting holes/Left Side Motor/BMG to Orbiter 1.5 mount - one piece - use supports.stl Another benefit of running a direct drive extruder is the possibility of printing flexible filaments, like TPU, TPE, Ninjaflex and others. With a bowden setup, you will be severely limited by the speed you can print these materials, and on some printers it’s not even possible. The gap between the stainless steel filament exit guide and filament feeding mechanisms is about 0.2-0.3mm, ensuring the best TPU printing experience Moved hight of Bltouch mount (for dragonfly BMS), and printable spacer to lower it again for other hotend or CRtouch