Uwell Crown 4 Coils - Pack of 4 - Mesh [0.23 ohm] No Nicotine

Product Information

The Crown M pod is easy to fill, just remove the mouthpiece to reveal the e-liquid port. To change the coil, just remove the old one and slide a new Uwell Crown M coil into place. The coils included with this kit feature a mesh build for better flavour and increased vapour production. We recommend pairing this kit with 70% VG e-liquids and higher VG liquids. Tank Leaking After Vape Coil Replacement: Usually, this means that you are not installing your vape coils properly.

The Uwell Crown 4 features a removable top cap for filling. Unlike standard threaded caps — which are difficult to line up and easy to damage — the Uwell Crown 4 uses a quarter-turning top cap for easy removal and replacement. No more crossed threads. Pre-made vape coils are easy to install, but sometimes, an issue may occur. Here are a few common vape coil issues and the solutions you need to fix them: The 0.2 Ohm and 0.4 Ohm coils are constructed with Stainless Steel (SS904L) instead of the traditional Kanthal, enabling them to heat faster and amplify both flavour and cloud generation. With the 0.2 Ohm coil, optimised for 70-80W, and the 0.4 Ohm coil excelling between 60-70W, you're guaranteed a truly customisable vaping experience. Goods supplied by the vendor are supplied with a warranty that guarantees that the goods will be free of defects for 90 days unless otherwise stated.Device Won’t Fire After Replacing Vape Coils: Typically, this means that your vape coil is installed incorrectly. Likely, it may not be screwed in evenly. The vendor is not liable for any indirect or consequential loss or damage including, but not limited to, loss of profit, loss of business, loss of goodwill, damage to trading relationships, costs, howsoever caused.

The 0.25 Ohm UN1 and 0.23 Ohm UN2 coils feature a mesh build that has a larger surface area which heats more e-liquid at a faster rate, resulting in an increase in both flavour and vapour production. The 0.25 Ohm coil can be used between 55 - 65W, the 0.23 Ohm UN2 coil can be used between 65 - 75W.Although I will say that in both modes chain vaping did leave the tank rather warm with some heat transfer to the mod, this is not unexpected as chain vaping is not the normal practice. The vendor is not responsible for minor variations in specification or description that are unavoidable or arise as a result of manufacturer changes. Any such changes will not rescind the contract. The 0.2 Ohm and 0.4 Ohm uses Stainless Steel (SS904L) rather than standard Kanthal, so these coils heat faster and increase both flavour and cloud production. The 0.2 Ohm coil works best between 70 - 80W and the 0.4 Ohm works best between 60 - 70W.