YOUCANIC OBD2 Scanner - Check Engine Faults

Product Information

Mazda dealers use a scanner known as the Integrated Diagnostic System (IDS). IDS is the software part; it requires a laptop and the VCM II hardware so that you can connect it to your Mazda vehicle. A similar setup is used on Ford cars. Operating the IDS scanner requires a yearly license that costs several hundred dollars. You can read more about Mazda IDS software and subscription costs here. Not only does it read and clear codes from all modules on vehicles, but it also allows you to perform adaptations and reset various systems. Neither the Autel MK808 nor the Autel MX808 has bi-directional control capabilities. On the other hand, the more expensive Autel MP808 is the only tool in this lineup that is capable of performing active tests, with the ability to send and retrieve information from various control modules. This allows you to conduct functional tests, inspection tests, system tests, and actuator tests, enabling you to uncover the root cause of vehicle problems and make troubleshooting more efficient. The bi-directional control capabilities of the MP808 set it apart from the other two scanners and make it a valuable tool for any mechanic or technician. You can use a scan tool while driving to stream live sensor data. However, do not use the scanner to reset control units or active sensors while driving. Can an OBD2 scanner damage your car? Launch Creader VII+ is so popular because it can diagnose those for systems of virtually any make, not just Audi and VW. Launch Creader vs. FIXD Sensor

This type of equipment gives a professional level of insight into the car’s infrastructure at a level of authorized repair shops. Apart from having access to all modules and stored codes, they can also start various diagnostic procedures. This bidirectional support allows you to test components and pumps to narrow down the problem and avoid misdiagnoses. Professional diagnostic tools will work with most makes and models, but some exemptions may exist. Conclusion The Autel MaxiCOM is a professional-level diagnostic scanner for Porsche, and other makes. While it is the most expensive scanner on this list, it is also the cheapest scanner you can get to offer similar functionality to a dealer-level scanner. Erase Codes: After the problem has been repaired, return to the scanner’s menu and select the option to “Erase Codes” or “Clear Codes.” This action removes the stored fault codes from the control unit’s memory, indicating that the problem has been resolved. Please note that you may or may not erase a code when the issue is not fixed.

2. Foxwell All System Scanner

For example: If anair suspension compressoris not working and leads to a lowered vehicle, the YOUCANIC scanner can activate the air suspension compressor to help you raise the vehicle or determine whether there is a problem with the air compressor.Here are a few examples of active tests which can help you test components, sensors, and switches: For these reasons, theYOUCANIC full system scanner withbidirectional support now comes with a Bluetooth OBD-II adapter so that you don’t need to be tied to the OBD-II port. In fact, you can diagnose a vehicle from 30 feet away. There is a wide range of automotive diagnostic tools on the market, each offering different capabilities, and features. But also, there might be a noticeable price difference between seemingly similar devices. This may create confusion when car owners try to decide which scan tool is best suited to their needs. So, to help out with this, we will go over three main types of car scanners. OBD2 reader View Live Dataof almost all sensors on the vehicle. Examples include oxygen sensors, throttle position sensors, abs wheel speed sensors, RPMs, gear selector position, convertible micro-switches, switch operation states, hybrid battery cell values, and more. Display graphs or tables.

Rapid and Accurate diagnosis for all available control modules. YOUCANIC scanner is not limited to only four main systems (engine, airbag, ABS, and transmission), but it can diagnose as many as fifty control modules on a single vehicle. BlueDriver OBD2 scanner is another powerful and reasonably priced scanner you should consider. We are working on adding a review of the BlueDriver scanner as well. Yes. Use it in as many cars as possible In fact; we want you to help your friends, family, and neighbors while you have the scanner. Our YOUCANIC scanner doesn't just diagnose - it also interacts. With our bi-directional support feature, you'll experience a level of interactivity typically reserved for professional and dealership-level scanners. Designed to empower independent mechanics and home-garage DIYers, our scanner hands you the reins, letting you take full control over your vehicle's health and performance. Integrated Diagnostic System (IDS) is the diagnostic scanner used at Ford dealerships. It requires a laptop to run the IDS software. You will connect the VCM2 to your car’s OBD-II port via the USB cable to your laptop. It will allow you to diagnose ECU, PCM, ABS, instrument cluster, airbag, fuel pump, traction control, climate control, rear & erase diagnostic trouble codes, flash new software to ECU, steering angle reset, program new keys, bleed the brakes, code new injectors and more.

Conclusion

This scanner from Autel offers excellent convenience and efficiency for testing and diagnosis. The interface is very intuitive with its seven-inch LCD touchscreen. It covers more than eighty vehicles made in the US, Asia, and Europe. All vehicles have different modules that can be read and controlled so this device's capabilities will be different depending on which make and model you use it on. That said, it looks like it supports most brands.