Challenge ME1031M-CH Corded 1000W Electric Lawnmower

Product Information

Lawnmower features: Electric rotary motor, Steel blade, 32cm blade width, 5 cutting heights, Cutting heights ranging from 2.5cm-6.5cm Designed for safety the high speed impact resistant polymer blades are a safer grass cutting alternative to metal blades. Twin safety triggers allow for right or left handed usage. A: The manufacturer does advise the cylinder mower to be stored inside, as some of the components will be affected by the weather. There is no recommended time before you need the blades sharpening, it will be your personal preference

To manage both battery life and cutting performance the automatic power management system releases more energy when the grass cutting gets tough and reduces energy usage when the grass cutting is easy. Petrol powered. This type is great for larger lawns where cable is not suitable. They tend to be on the expensive side but are powerful and can really cut fast. In addition, this type is easy to manoeuvre around large objects. Self-propelled petrol lawnmower can also cost you a bit more but as mentioned if you have a huge area with rough grass this is the best choice. Even if you use the wrong gas, your mower will probably run for a while, but eventually the engine won’t restart. If you make this mistake, just drain the fuel tank and see if the spark plug needs a change. Then, refill your mower with the right gas. Challenge Lawnmower Review Part 1 - Electric Frequently Asked Questions Challenge Electric Lawnmowers

Website Reviews

This hover mower is ergonomically lightweight and highly manoeuvrable which is ideal for very small lawns. It features a centrally positioned collection box which is easy to empty and easy to fit.

A: The cutting height range for the Challenge 30cm Wide Cylinder Mower is 1.8cm-3.8cm. So, if the grass is longer than 3.8cm then additional products would be required to reduce the height of the grass Cutting width: This refers to how wide a stripe the lawnmower can cut. A larger cutting width will reduce how much time you spend mowing the lawn. The focus of this review will be to cover the Corded and Cordless models plus the Petrol Push and Self propelled models to give you a better understanding of what each of them has to offer plus all the pros and cons associated to each. Hopefully by the end of the review you will have a clear thought process if indeed a Lawn mower under the Challenge brand is for you or not. Rotary. This mower type has a single blade rotating horizontally underneath it which looked like a plane’s propeller. This is a versatile type, can take care off of most grass types and is better than a cylinder mower when it comes to cutting rougher and longer grass. It can be powered by electric, petrol engine or rechargeable battery. It is important to choose the ideal size of lawnmower since this will make a huge difference when it comes to ease of use. If you will get a large one for a small garden or lawn, then you will have a hard time manoeuvring it in tight corners, while getting a small mower for a larger lawn will take up a lot of your time when cutting all the grass.Hover. As the name implies, this type hover above the ground, thus it’s easier to push around and skillful at mowing uneven surfaces. Hover types are the perfect option for unusual-shaped lawns and cheaper than the other types. But they don’t work well with large gardens. They are usually electric powered and have rotary blades. This, combined with the high capacity 4.0ah battery, means it will cut up to 200m on a single charge. The powerful hover lift creates a lightweight and very manoeuvrable mower which is ideal for small gardens. The compact size and folding handle allows easy storage in the smallest spaces. A: Once the handle is installed the overall dimensions of the Challenge 30cm Wide Cylinder Mower L1200 W440 D220cm. It isn't foldable at all. I guess it's about 40-45 cm wide. The upper and lower handle parts are bolted together (so could be disassembled), and the complete assembled handle then just pushes onto lugs on the cutting chassis. i.e. the whole handle could be detached