EXIT Toys Pool Dome - ø360cm - Universel - Round Multifunctional Cover - Fits Frame Pools Measuring ø360 - ø370cm - For Clean and Warm Pool Water - Pool Accessories

Product Information

Hinge mechanism with support: Collect the elastics which are used to attach to the dome and take the screws with the star cap out of the legs of the swimming pool. Place all these parts in a bag. The domes with swimming pools sized 400 x 200 and 540 x 250 cm have a different impeller hinge, namely one with a pneumatic spring. Due to this, the dome can stay half open, without having to attach it to the frame with straps. When you are not using the swimming pool, you can attach the dome to the pool with these straps. That way you also prevent dirt from ending up in the water and of course you will benefit from a natural heating of the water. Before you start, it is important to take a look at the hinge of the dome. EXIT Toys sells domes with a hinge mechanism and a hinge mechanism with gas pressure spring. The standard hinge mechanism consists of five pins. The hinge mechanism with gas pressure spring is wider and consists of two parts. One part with three pins and one part with four pins.

Good to know: these domes are only suitable for the rectangular frame swimming poles sized 400 x 200 and 540 x 250 cm of EXIT Toys! Finally, with round swimming pools, the number of legs is important as well. The EXIT domes and canopies only fits round swimming pools with an even number of legs. Did you choose a dome and a canopy? Then first attach the impeller hinges of both products to each other. That way they’ll be much easier to work with. Step 2: getting started with the setup of your dome A frame swimming pool in your garden is a real treat on those hot summer days: a lovely way to cool down at any given moment. And thanks to the multifunctional dome from EXIT Toys you can even extend the swimming season a little because it creates an actual indoor pool. However, after an entire season of swimming, it is time to take down the dome. How do you go about that? In this blog you will find a plan with handy steps for taking down your EXIT dome. Be well prepared to make the job easier All escape windows must lead to a safe place that can be accessible by ladder by the fire brigade to provide necessary help to reach you in the case of a fire. It must be able to stay open without being held, as well as opening to the side or upwards to at least 450mm.Hinge mechanism with gas pressure spring: Close the dome. Take the cover plate of the hinge and screw the gas pressure spring loose. Now you can open the dome and then easily lift it out of the hinge. Step 2 When the sun’s out bright, the EXIT Toys canopy lets you continue swimming without a care. Namely this canopy ensures optimal protection against UV radiation. You can easily assemble the canopy onto the swimming pool and due to the fan system, you can create complete or partial shade over the swimming pool. That way your kids are perfectly protected against the sun! That’s it, the work is done! Namely you can skip Step 3: these tips are meant for all other EXIT domes. You can now go and enjoy your EXIT swimming pool with dome and/or canopy! Step 3: the final steps... Popular options in the flat roof exit windows include the Velux Clear Flat Roof Exit Window CXP S04G 100100 and the Velux Clear Flat Roof Exit Window CXP S04G 090120. Is your swimming pool not in the chart? Chances are that an EXIT dome or canopy does fit your swimming pool. We just don’t have all swimming pool brands and types charted (yet). In this case: to measure is to know! With the dimensions of your swimming pool you can find the right dome or canopy. Step 3.

Lay the tarpaulin or canvas on the ground, for example on the grass or terrace and pass the tubes through the tarpaulin or the canvas. It is more convenient to do this together with someone else.With an EXIT swimming pool dome or canopy you get even more fun out of your swimming pool. When the sun’s out bright, the canopy offers protection against UV radiation. With a dome you can have fun in your very own indoor swimming pool even when the weather isn’t that great. EXIT Toys has some convenient tips for setting up such a dome, so you can get the job done fast and start your swimming adventure! Step 1: Preparation Should you have any questions regarding flat roof exit windows or would like any other additional information on our extensive product range, please do not hesitate to get in touch with us. Note: do you have a swimming pool dome or canopy sized 400 x 200 or 540 x 250 cm? Then further in this blog we offer you some useful tips for setting up domes with these dimensions. EXIT tip: Push the tubes out of the dome instead of pulling them out. This way you will prevent them from piercing into the dome. It is also a good idea to number the tubes. This will save a lot of time and effort for next season’s set up. Screwing the hinge loose Stap 4 The end is near. All that’s left now is dotting the i’s and crossing the t’s and then you can go and enjoy the benefits of your EXIT dome or canopy.

The double-glazed unit has a laminated inner pane for additional safety. The Velux emergency exit dome is available in a clear or obscure polycarbonate cover. With an EXIT swimming pool dome on your frame pool, the kids can have fun in the pool even when the weather isn’t all that great. Namely they won’t be bothered by rain or wind. Once playtime is over, a dome prevents dirt, like leaves and insects, from ending up in the water. In addition, the transparent dome retains the warmth of the sun. That way the water is naturally heated up and you’ll feel like a fish in the water! Good times with an EXIT canopy Beware! The rectangular domes in sizes 400 x 200 cm and 540 x 250 cm do not fit on swimming pools of another brand. All dimensions in a row The manual states that you must attach the pneumatic spring to a tube of the impeller hinge by means of a screw. This screw is already inside the tube so you will not find it in the bag with the added separate screws. Screw the hinges loose and take them off the swimming pool frame. Collect all the screws and spare parts in a bag to make it easier for the next season. Cleaning and storing awayWhile you continue setting up the dome you can start (partially)filling the swimming pool. With about 10 percent of swimming pool water, the frame gets more stable, and the dome will be easier to attach. Then, measure the top rail (upper tubes) of the swimming pool. This can be a maximum of 50 millimetres in diameter. Note, the top rail cannot have an oval shape.