Joined in 2023 
82 
63 About this deal
Three months Splice Sounds membership with new Splice accounts – offering millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily. Ensure Focusrite Control has been installed on the main C: drive of your computer. Installing Focusrite Control to a secondary drive can cause issues. If in doubt, please reinstall Focusrite Control. If you are not able to see your Focusrite interface in Focusrite Control , you may see one of two error messages : If you are using macOS with a Clarett Thunderbolt, Saffire or Red interface, ensure you complete the steps in this article for Apple silicon systems, and complete the steps in this article for Apple silicon and Intel systems. If you are a user of a; Clarett Thunderbolt, Saffire or Red interface, on macOS 10.13+ please see the following article in addition to the below steps:
If your interface is being seen at a hardware level, your interface model will be displayed in the main window as shown below. The single 3rd Generation Scarlett mic preamp sounds great straight out of the box. Air mode recreates the legendary effect of Focusrite's ISA mic pres and makes vocals and guitars shine. The high-impedance, high-headroom instrument input is great for recording guitar or bass without clipping, while our iconic Gain Halos make it easy to set input levels fast. Two balanced outputs are hum-free for pristine monitoring, mixing and mastering with studio monitors. And it comes with some of the best-loved tools in the business, including Ableton Live Lite, Avid Pro Tools Artist and Hitmaker Expansion – with plugins from legendary Auto-Tune® creators Antares®, Brainworx®, Softube®, Landr, XLN Audio®, Relab and more. The service will not quit and will remain in Activity Monitor, your interface should now be detected in Focusrite Control. Added the ability to change the colour of the good, pre clipping and clipping stages of the Gain Halos on Scarlett 3rd Generation interfaces. Two inputs and two outputs; one 3rd Generation mic pre, one switchable line/inst input and balanced outputs.The 4 th Generation of Scarlett includes audio meters on each gain pot, keeping you in the know of how much headroom you have. Even better, why touch them? With the Auto setting you can play for 10 seconds and Scarlett will automatically set the gain, you can even leave it on safe mode meaning you’ll never clip your signal again. Ensure Focusrite Control has been installed to the main C: drive of your computer. Installing Focusrite Control to a secondary drive can cause issues. If in doubt, please reinstall Focusrite Control using the default options.
Turn ideas into records. Hook up a guitar and a mic and make the best recordings you ever have. Solo is studio sound made simple. The service will not quit and will remain in Activity Monitor. Your interface should now appear in Focusrite Control.If your interface is showing correctly in the System report but Focusrite Control still displays No Hardware Detected, please complete the following instructions:
If you are using a Clarett Thunderbolt in terface then please ensure you have allowed the driver to load as per this article . If you are using a Clarett Thunderbolt interface then please ensure you have allowed the driver to load as per this article . Also, Scarlett Solo and 2i2 3rd Gen will be detected by Focusrite Control, but they display the message 'Output routing is not supported on this device' because their output controls are all located on the front of the device itself. If your i nterface is showing correctly in Device Manager but Focusrite Control still displays No Hardware Connected, please complete the following instructions : To show this mode is enabled, the channel number LEDs both light green (they are white by default).Incl. USB cable (type C to A) and Hitmaker Expansion Software Bundle (Ableton Live Lite, 3 months Splice Sounds membership and plug-in bundle for songwriting, mixing and mastering, Pro Tools Artist (three-month subscription) and Avid Complete Plugin Bundle).
Focusrite Control Server should be added as a firewall exception automatically during installation . I f the Focusrite Control server is not in Firewall Options you can add it by going to: We've added a setting to the Scarlett Solo 4th Gen which combines both input channels to allow applications that can usually only receive one input to receive both inputs (line/inst and mic). Added the ability to choose whether 48V is retained after restarting Scarlett 3rd Generation interfaces. If your i nterface is showing correctly in the System report, but Focusrite Control still displays No Hardware Connected, please complete the following instructions: We recommend you disable this feature when recording in DAW software, which allows you to select the input channel you wish to record.
Customer reviews
Sample or Resample with ease, Send stereo audio from your music apps and other software straight to your DAW with the Solo’s virtual inputs. This is an interface built to last, solid metal construction means it will survive the test of time and even worse… gigs. Another major update is to Focusrite Control 2, all primary controls are now physical controls on the front of the unit with larger spacing, most controls are also now controllable digitally and the new control software is fully compatible with screen readers, allowing visually impaired and blind users to control their Scarlett interface. Key Features:
Related:
Great Deal 
New Comment