Tritonaudio FetHead - Studio Preamplifier

Product Information

Whether you’re making music, podcasts, or video recordings, having reliable gear you can trust is key. Both FetHead and Cloudlifter make viable alternatives to more expensive in-line preamps. You’ll have probably noticed that both of these options are the two at the lowest price points. That’s because all of the alternatives we’ve covered do largely the same thing – provide clean, transparent gain. The only reason to go for something more expensive than the Durham MKii or the FetHead is if you need either more gain or want additional features. Frequently Asked Questions Is a Cloudlifter necessary? The Durham MKII has a small footprint and is a more affordable alternative to CL-1. If 20 dB is enough gain for your needs, it has an excellent value-to-cost ratio and high-quality gain to offer. Other than these situations, a FetHead can be a great addition to your mic setup if you need a clean boost to the level of your dynamic or ribbon microphone. Detailed Review Cloudlifters benefit from the simplicity of their construction. The sturdy steel box sports just enough outlets and connectors to get the job done. This no-frills, high-quality design means that it can withstand show after show.

The Triton Audio FetHead is an economical, portable, and easy to use alternative to a Cloudlifter. It does exactly as advertised, and it does that as well, if not better, than the competition at a significantly lower price point. I highly recommend it to anyone who doesn’t want to pay extra for bells and whistles and just needs to cleanly boost their mic signal.FetHead is an ultra-low noise, high quality, in-line microphone preamplifier. It provides improved sound for ribbon and dynamic microphones. Small, compact, but, powerful, Fethead utilizes tried and true FET technology to deliver up to 27dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume.Boost your microphone! Despite not being a traditional preamp, Cloudlifters have become a recognizable name and device for a reason. Using this low noise solution to increase loudness is a game-changer for low output microphones. Cloud Microphone’s Cloudlifters offer a powerful effect at a lower price point than many competitors.

It also features a dedicated buffer amp to give you a consistent +28 dB gain boost regardless of the connected load. Moreover, it does a great job at rejecting RF and electrical interference, which makes it desirable for on-location use. VerdictAnother way to compare these two in-line mic preamp choices is by asking yourself a series of questions about your gear, process, and ideal price: Non adatto a microfoni a condensatore dato che blocca la +48V in uscita, per quelli occorre un altro modello chiamato FetHead Phantom. Robust, quality components, made in the US and considerably cheaper than the CL-1, the Durham is a great alternative to a Cloudlifter. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy.

Overall, the key differences in the FetHead vs Cloudlifter debate come down to small use-case differences. If you’re constantly performing on the road in small venues, FetHead’s portability may convince you. Some microphones need a lot more gain than others. Think ribbon mics and broadcast dynamics such as the GearSlut's favourite SM7B and RE20. The DM-1 is made with grade high quality components and FETs which results in very low noise. The gain is clean and neutral which is exactly what you want from a mic activator. This lightweight, portable, and easy-to-use activator adds gain without distorting the audio. If you have a low output ribbon or dynamic mic and an eye for simplistic, no-frills gear, FetHead should meet your needs and more. Cloud Microphones Cloudlifter Whereas if you’re a band director or live podcaster who performs in spacious auditoriums, the ability to place a Cloudlifter along the chain to reduce noise and boost your noise floor is invaluable.The construction is all metal and the XLR connectors are gold plated for the most reliable signal connection. Here are the specs: Incidentally, the Phantom version does pass on phantom power since it’s designed for use with condenser microphones.

While, it’s nice to know what a microphone activator can accomplish, knowing it will work with the gear you already own is essential. The last thing you want to do is add incompatible noise to your setup. Here are the basic features of Triton’s FetHead: As for the amount of the boost that the FetHead gives you, it’s specified as being 27 dB by Triton. This varies by load impedance, however, so you may find that you get a higher or lower boost depending on your connections. These mic activators can add a much-needed boost to your noise floor without marring the quality of your output. It’s as simple as plugging in your XLR cable, adjusting the gain, and making sounds! Additional resources:Despite having a name that is reminiscent of an energy drink, McBoost delivers a robust boost with impeccable presentation. It boosts any low-level microphone you hurl at it. The price tag may pinch a bit, but it’s what you pay for the highest possible standard and most stable in-line boost. The aim of the FetHead is to boost the signal cleanly by up to 20dB before hitting the mic-pre so you can use less gain and have a cleaner recording. It does this by using double jFET configured as a double class-A amplifier which is super clean and is conveniently powered by the phantom power from your pre. Phantom power is not passed through the FetHead and so you can use it safely with ribbon microphones (a phantom version is available if you want to use a FetHead with a condenser) If you’re in the market for a mic activator that gives a clean gain boost, you’ll likely read plenty about the FetHead vs Cloudlifter debate. In this article, we’ll cover the pros and cons of these devices. In the end, you’ll have a much better idea of which inline mic preamp will best suit your needs! One of the biggest worries with mic activators is that they will skew the frequency response. However, this is not an issue with FetHead, as it adds controllable clean gain up to 27dB. In setups with long cables, however, FetHead does help reduce noise as well as Cloudlifter does. Verdict A Cloudlifter (or alternative mic activator) is necessary if you’re using a low sensitivity dynamic or ribbon microphone and the preamps of your mixer/audio interface don’t provide the gain needed to bring your microphone up to the required level.