DJI Mini 3 Series Intelligent Flight Battery, Compatibility: Mini 4 Pro*, Mini 3 Pro, Mini 3

Product Information

APAS 4.0 is not available while recording4K/48fps, 4K/50fps, 4K/60fps, 2.7K/48fps, 2.7K/50fps, 2.7K/60fps, and 1080p/120fpsvideo.

Step 2: Put out the mobile device holder and choose an appropriate remote controller cable based on the type of mobile device. Then connect the mobile device. Other common PD fast charging chargers are supported, such as Apple USB‑C power adapters and Android GaN chargers. When using DJI RC-N1 remote controller with your mobile device, you can live stream with your DJI Mini 3 via DJI Fly. Live streaming is not available when using DJI RC.

Other useful videos for this product

At this point, you should be charging your batteries, either through the two-way charging hub or by plugging the USB cable directly into the drone. The nose-mounted camera supports 4K30 video, like the Mini 2. While it uses the same Quad Bayer cameras as the Pro version, here you're limited to 12MP stills (48MP is not available). The 24mm f/1.7 lens still supports clip-on ND filters, 16:9 landscape and 9:16 vertical video, and ample upward tilt; it can go from straight down (-90 degrees) to 60 degrees upward. DJI Mini 3 Propeller Holder: The Propeller Holder secures and protects the propellers for safer storage and transportation. DJI Mini 3 Series 360° Propeller Guard: Specially designed with light texture, the propeller guard protects the propellers from collisions, and improves flight safety. It is especially applicable in indoor scenes with many obstacles, bringing more safety guarantees for beginners. Measured at a constant speed of 21.6 kph in windless conditions. With DJI Mini 3 Pro Intelligent Flight Battery, the aircraft can fly for up to 34 mins.

To that end, it comes with a whole host of updates and new features that set it apart from its predecessor, the Mini 2, including a much-improved camera and a three-way sensing system to prevent crashes. DJI builds a geofence system into its drones, FlySafe. The system warns you if you are trying to take off in restricted airspace or if you're entering it. It's effective in practice; I live near a small local airport and the app lets me know if I'm about to stray into its airspace. Additionally, if you want to make sure the drone stays within a certain distance you can set a custom geofence distance in the app. If a PD fast charger is currently not available, you can also use a charger with a Type-C port for charging, but the charging speed may be relatively slower. Over-Discharge Protection: When the battery is not in use, the discharge automatically pauses to prevent excessive discharge.Note that the battery can be charged without being removed from the drone. If you would like to install or remove the battery from the drone, please see below: Only fly in environments that are clear of magnetic or radio interference, buildings, and other obstacles. It is recommended to set the RTH Altitude higher than the height of obstacles in the surrounding environment to avoid collisions during RTH. It is recommended to set "No RC Signal Action" to "RTH" under the remote controller Settings in the app. (The aircraft will automatically return to the Home Point when the remote controller signal is lost.) There are three flight modes available: N (normal), C (cinema, which reduces flight speed to ensure smoother video pans and moves), and S (sport, which increases speeds to maximum and removes all obstacle sensing). The drone flies swiftly (up to 16m/s in S mode) and stably, with a prompt response to the user’s control inputs.