Joined in 2023 
82 
63 About this deal
One single application can remove up to five layers using this method. Removal can be made easier using a bowl of soapy water and a stainless steel scouring ball, especially on intricate pieces. Use of soapy water and a stainless steel scouring ball also can remove stains from the grain effectivley. On dead flat areas a scraper is advisable to remove lose material first.
Yes, it would be fine for removing Artex from beams. X-Tex won’t damage the wooden surface. Depending on how old the beams are there is the possibility of them being covered in a dark stain also. X-Tex will also remove this. If you require any further assistance please call the technical helpline number on the label and they can advise. Customer Answer: Once this time is reached test a small area first to ensure that it has worked correctly. The paint should lift away with the paste. Home Strip™ is a revolutionary unique patented water-based paint stripper using science not solvents that is safer to its user and the environment than conventional hazardous solvents. Home Strip® awarded Millenium Products Status for creative and innovative products for the Millennium. No – plaster was not affected when I removed the artex – the scraper may “rough it up” slightly though. Customer Answer:Most DCM-free paint strippers have just replaced one hazardous solvent with another, but technology removes the hazardous solvent content and replaces it with water. A safer alternative for you and your family. If you wanted to, you could also sand the wood after you’ve stripped the paint. But, of course, this all depends on what you intend to do next. If you plan to repaint the wood, sanding is essential. You should start by washing the surface with warm soapy water to remove any dirt and dust and then wipe it dry with a microfibre cloth. Next, you use the heat gun to soften the varnish, always read the instructions and start on a lower heat setting first so you know it is not going to be too hot, you can increase the heat if it isn’t softening the varnish as you need it to. Focus on one area at a time and when the varnish has softened you then use a scraper to scrape it away whilst it’s still soft, be really careful when doing this so you don’t try and scrape away the hard varnish underneath as this will damage the surface you are trying to get to. When you have done this you can then move onto the next area of varnish. If there are several layers of varnish that have been painted over, again and again, you will need to repeat the process a few times. There will be some areas of varnish that are difficult to reach and for these, you will need to use the sandpaper guide to remove. When all the varnish has been removed you should wash the surface with warm soapy water to remove any dust and then leave it to dry completely before you treat the original surface with anything else. Again, it a long and laborious job removing varnish with a heat gun so give yourself enough time and you will definitely need a lot of patience. Removing Varnish with Eco Solutions Home Strip® Paint & Varnish Stripper Grime Go removes all types of grease, oil, dirt, stains, grime, dirt, mould, adhesive residues and paint splashes. It can be used to prepare surfaces for re-painting or just to clean and brighten the substrate. No fumes, no skin burns, no abrasives and non-toxic. Use vinegar: Vinegar has become a popular cleaning product, but it can also be used to strip paint. It’s not as strong as a paint stripper, so it may take a few coats and some extra scraping on your part, but it’s certainly an option.
DIY Doctor, in the interests of safety does not recommend sanding down or burning off paint from internal or external surfaces of a house unless you can be sure the paint does not contain lead. If this is the case, please see our project on preparing timber for painting where you will get full instructions on how to sand. A technology-driven company, Eco Solutions has developed water-based paint strippers, coatings removers, and related products. Eco Solutions‘ products are all safe-to-use, water-based, non-toxic products and there is one for most jobs whether you are upcycling, cleaning or stripping in your home or commercially. Coatings with textured surfaces can be easily removed using our X-Tex Artex Remover utilising a working wet system which makes it safe to do. Unlike the gel type where in most cases you can see the reaction occurring, you will be unable to if you use paste so ensure you wait for the full amount of time specified by the manufacturer.A heat gun works by softening and loosening the varnish making it easier to remove. It is surprising but a heat gun doesn’t scorch the wood or surface you are removing the varnish from, however, when you have used the heat gun to soften the varnich which is time-consuming you then also have the task of scraping the varnish to remove. Despite the above advantages there are also quite a few disadvantages; it’s easy to use the wrong grade of paper for the wrong surfaces causing damage. This helps to prevent too much dust and depending on the surface you are stripping will create a lovely smooth finish. You don’t need to wear a mask when using the product as it is a non-toxic, water-based product which is solvent-free so there are no fumes or harmful toxins to breathe in. Will I need safety goggles when using Eco Solutions Home Strip® Paint & Varnish Stripper?
Revamping an old table is hugely rewarding and will cost you much less than buying a new one. A revamped and upcycled table can be stripped and repainted with another varnish, oil or paint to give it the look you want to suit your decor and style. Apply a liberal amount of stripper all over the table surface using an old soft paintbrush. If you can remove the legs of the table then do this after you have removed the varnish from the tabletop as this means you won’t need to worry about the varnish that is deep in the joins of the legs and tabletop that can be difficult to remove. Gently lift the varnish following the direction of the grain using a smooth-edged scraper. When you have removed all of the varnish layers wipe it over with warm soapy water and you will see a huge difference, you may be surprised at the original colour and grain which layers of varnish will hide and it will often change your mind about what you will do with it next. Wood oil is an amazing product to use to upcycle a table after the varnish has been removed as it will protect it but you will still see the original wood and surface which can be beautiful. How do I use Eco Solutions Home Strip® Paint & Varnish Stripper for Removing Varnish from a Wooden Bench or Garden Furniture? As I’m sure anyone that has previously tried this will agree, it’s not one of the nicest jobs to do as it can be messy and time consuming. The greatest competitor to Eco Solutions Home Strip is the solvent based Nitromors which was introduced by Henkel. We reviewed a copy of their datasheet from 2005 and it shows a toxic and harmful warning signs with the added note, in section 3 that…… As with the other paint stripping methods wear eye protection and also a mask. Heating paint can in some cases give off harmful fumes. Also, always, always wear a pair of heavy duty gloves such as riggers gloves. Which ever of the above methods you have used, once you have removed all of the paint it is always a good idea to clean over the surface with some fine wire wool or very fine sandpaper.If the surface you are working on is wooden this may not be the ideal solution as obviously it involves the use of water and thus the water will be absorbed by the wood making it swell so before re-painting can commence you will have to give it plenty of time to dry out. Once you have removed the paint, dust away the excess with a brush and give it a good clean with sugar soap - this step is crucial as you don’t want this to get in the paint when completing your upcycling with the final coat of paint,’ says Emma Bestley, Creative Director and Co-Founder of YesColours. Developed using ‘science not solvents’ by Eco Solutions – the world’s most advanced, innovative water-based technology Paint a liberal amount of paint and varnish stripper over the whole door and leave for 20 plus minutes. Slide a clean-edged scraper under the varnish and it should lift if it’s ready to be stripped. Use the scraper in the same direction as the grain of the wood and work over the whole door. For uneven edges and joins you may need to use sandpaper if the scraper doesn’t remove the varnish. That’s it, it’s done and you can now wipe it down with a damp cloth and decide what colour, oil or varnish you are going to use to make it like new or old if that is the style you are looking for. How do I use Eco Solutions Home Strip® Paint & Varnish Stripper for Removing Varnish from Wooden doors?
Related:
Great Deal 
New Comment