Der Kulthit Beer Backpack Beer Dispenser Backpack Drinks Backpack 1 x 3 Litre Capacity (Beer Backpack 3 Litres + 50 Cups)

Product Information

So this bag comes out at a similar size to the other cool bags, holding up to 25 litres which is the same as the Tourit models when directly compared. I’ve tested the bag with some food and bottles and it does do that job keeping everything cool! A properly performed, seven-day recurring cleaning is normally completely sufficient for to maintain the system in a good hygienic operating condition. Before the basic cleaning is carried out, an intensive inspection of the dispensing system the dispensing equipment and the entire environment (beer storage room, interior of the dispensing system, to determine the actual cleaning requirements. It is used to remove production residues such as metal chips, easily soluble plastic residues, grease, scale and also installation residues. This bag is really comfortable with padded straps and lightweight to carry so great in terms of initial comfort. One thing I have heard though is just watch out for the sweat patches – a risk with any of these bags but just thought I’d throw that in there with the warmer weather coming up and they always creep up on you.

However this feature means the bag is very easy to clean that way as you can completely remove the lining to wipe the bag. Above-the-line, meaning above the surface of the water, and below-the-line, meaning below the surface of the water, are likened to a ship in the water. Specification: Material type: Polyester, Keep food cold: N/A, Features: ‎Water-Resistant, Capacity: N/A,

If the lining isn’t attached, it can prevent you from being able to maximise the cool bag space. If this doesn’t bother you then just take into consideration bags with detached lining may come out smaller than their measurements. I’ve done a little spill test and the cool bag did not disappoint – all the liquid was contained and didn’t leak throughout the bag so it’s passed the test in that sense! Also very easy to clean up any spills as you can just wipe it clean and the material doesn’t absorb anything which is great. The only thing I’d say about this bag is that the lining isn’t attached to the actual bag. This is both a good thing and a bad thing (depending on how you look at it). It does impact on the amount of space inside the main compartment. And I would be careful about some beer bottles and things catching on it. Just something to bear in mind.

Often cleaning itself, it will also be necessary to replace components, as many older parts are unsuitable for chemical cleaning agents. After successful completion of the work, the performed basic cleaning is entered in the basic cleaning in the dispensing system documentation. Hereby an whether the basic cleaning will be successful or whether it is necessary to replace a replacement of components (hoses, spouts, python, makes more economic sense. If necessary, this can be followed by a consultation with the operator on improvement measures in daily operation (e.g., daily cleaning of the beer dispenser).

Latest articles

This classic form of advertising is carried out by placing advertisements in print media, radio and television commercials or by means of posters and outdoor advertising.

The correct combination of all 4 cleaning parameters ensures that the desired cleaning goal is achieved.a) Prepare alkaline beer dispenser cleaning solution in the concentration recommended by the manufacturer. To kill germs on disassembled and cleaned components (tap, tap head...)before re-installation in the beer dispenser system In principle, however, basic cleaning should only be a kind of emergency measure for the permanent operation of a beer dispensing system. During the cleaning cycles, the previously dismantled components are disassembled and cleaned separately manually alkaline/acidic. Look for beer enterprise professionals who have got a wealth of experience with an impressive portfolio of a success beverage merchandise.