Mapesil AC Jasmine (130) Silicone

Product Information

All Mapei Ultracolor Plus grout colours are also available in a matching silicone – Mapesil AC Silicone. If using this grout with moisture sensitive natural stone tiles, a low modulus silicone is advised – Mapei Mapesil LM Silicone. Where Mapei Mapesil AC is to be applied in areas of continuous immersion, i.e. inside a swimming pool tank, the joints must be primed using Mapei Primer FD.

Forming a perfectly elastic gasket between different elements in building, mechanical engineering, ship-building, automobile manufacturing, etc. To control the depth of the joint and to prevent Mapei Mapesil AC Silicone from adhering to the base, the bottom of the joint should be filled with a sized Mapefoam, a polyethylene cord Mapei Mapesil LM does not emit unpleasant odours, and comes in the form of a thixotropic paste. It is easy to apply on vertical and horizontal surfaces and cures at room temperature through the humidity present in the air to form a flexible sealant. Seals made using Mapei Mapesil LM are extremely stable over time, even when exposed to inclement weather, industrial environments, temperature variations or water. The product remains flexible over a temperature range of between -40°C and +150°C. Mapei Ultracolor Plus Tile Grout is made up of a blend of special hydraulic binders, graded aggregates, special polymers, water repellent admixtures, organic molecules and pigments. Mapei Ultracolor Plus is suitable for grouting walls and floors in areas that are subject to intense traffic, such as shopping centres, airports, restaurants and other public spaces. It is also suitable for residential use in all areas, such as facades, balconies, terraces and swimming pools.

You may also like…

Do not apply Mapesil LM Silicone on rubber, heavily-plasticised plastics or bitumen. The oil and plasticising agents in the substrate may migrate to the surface and compromise the bond or penetrate into the sealant leading to a variation in colour and mechanical characteristics. After the final cleaning operation, if the surface still has traces of Mapei Ultracolor Plus due to incorrect application, it may be cleaned down with an acidic cleaner (e.g. Keranet), by following the relevant instructions, at least 24 hours after grouting the joints. Only use Keranet on surfaces which are resistant to acid, and never use it on marble or limestone material. Do not use Mapei Mapesil AC Silicone for joints in exterior between ceramic tiles and light-coloured natural stone because dirt could accumulate by the joints. Use Mapei Mapesil LM Silicone. Final cleaning of the powdery film of Mapei Ultracolor Plus from the surface may be carried out with a clean, dry cloth. Thanks to the low modulus of elasticity of Mapei Mapesil LM Silicone, it is suitable for sealing internal and external fillet and expansion joints, including those subject to high levels of movement when in service, between: Pre-fabricated panels, window/door fittings and wall surrounds, pipe-work and vertical walls, similar and/or different types of coating materials. It is also suitable for sealing joints in doors with limited pedestrian traffic.

Sealing joints between sinks or sanitary ware and ceramic tiles in kitchens, bathrooms and showers with colours coordinated with the grouts. Mapei Mapesil LM Silicone delays the formation of surface mould. Mapei Mapesil LM generally offers good resistance to chemical agents. However, because of the wide range of products and service conditions, if in doubt carry out preliminary tests beforehand. Mapei Ultracolor Plus forms a smooth, compact finished surface with optimum resistance to abrasion, compression and flexural strength, and good resistance to acids with a pH > 3. Floors are ready for light foot traffic after approx. 3 hours. Surfaces grouted with Mapei Ultracolor Plus may be put into service after 24 hours. Basins and swimming pools may be filled up 48 hours after grouting.Mapei Ultracolor Plus is available in 2kg and 5kg bags, in the following colours: Please note, only some colours are available in 2kg bags. The resistance of Mapei Mapesil AC to chemical agents is generally excellent; however, due to the numerous products and working conditions to which Mapei Mapesil AC can be applied, it is always advisable to do a sample test in cases of doubt. Under certain conditions Mapei Mapesil LM Silicone may have a water-repellent effect along the edges of joints. This effect is only noticeable when surfaces are wet and is invisible when the same surfaces are dry. This phenomenon, however, has no effect on the product’s performance characteristics. Do not use Mapei Primer FD when sealing stone or marble. Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.g. a MAPEI sponge), working in a diagonal direction to the joints. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. This operation may also be carried out with a machine with a sponge belt or rotating disc. When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface.

Applying the grout: Fill the joints with the Mapei Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. Remove any excess of Mapei Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh.When Mapesil LM is constantly immersed in treated water typically found in swimming pools its physical-mechanics may be affected prematurely. Given the wide range of products used to treat water and the actual quantities employed, its suitability over long periods may only be guaranteed following specific laboratory testing. Make sure your tiling project’s joints and seals stand up to everyday wear and tear with Mapesil, an acetic-crosslinking silicone sealant from the world’s leading manufacturer of tiling grout, adhesives and sealing products, Mapei. When resistance to acids or, where extreme cleanliness or sterile conditions are required, use a suitable acid-resistant epoxy grout. Mapei Mapesil LM is particularly suitable for surfaces sensitive to acids on which conventional neutral or acid sealants normally provoke changes in colour or staining of the substrate.