Waxoyl High Pressure Sprayer Kit with Extension Hose and Spray Nozzle for Car Wax Spray and Car Polish. Car Care Kit by Hammerite for Waxoyl, Perfect for Car Shampoo and Wax

Product Information

More recently, I've used motor oil, thinned with diesel or kerosene to the point where it can be sprayed with one of those cheapo trigger-action hand sprayers, though a proper cavity sprayer would probably be better. Diesel is slightly more available and has a higher molecular weight than kerosene so its slightly more protective in its own right, but it smells unpleasant and stings the eyes, so I prefer kerosene. White spirit would evaporate if one wanted to build up multiple sprayings, as would water. Like anything else, you have to prepare properly and apply it properly. It's no good just slapping it on crusty surface rust as that'll just fall off. Do some prep work first, take the "clumps" off and cover the rust hiding underneath those big clumps. There are also different kinds of treatments. Plain old Waxoyl is water resistant but will wash off over the space of 4-6 months, sooner if you make a habit of driving through a lot of standing water. There's also Underbody Seal with Waxoyl added. Our range of direct-to-metal paints can be applied on top of the affected area and instantly provide reliable rust-proofing for years to come. Produced by Hammerite, our car paints are available in pots or in spray cans and in a variety of popular colours. They’re perfect for DIY car-rust repairs. Car rust removal solutions from Halfords I also had the real benefit that SWMBO was out so I had since 3.00pm been shoving the 2 gallon cans into the sink with near boiling water. I should have known things were going to go “slightly wrong” when I started.

Waxoyl and Ziebart both definatly work. My MK2 Granada had waxoyl done from new and its survived very well in places it should have rotted away. The sills, chassis, doors etc are all still in good solid original condition after nearly 30 years and 200K miles! The car has needed extensive welding but only in places the original Ford coatings have failed! Its certainly done the job as im sure the car wouldnt be around today had it not been treated. It can be a pain though when welding as it melts in the heat and catches fire easily! some air in at 50psi, you should get a nice circular spary of waxoyl out of the nozzle, increase pressure and if you are getting a real lopsided spray pattern take the nozzle apart and

Real MPG

I've got away with it...."all done"...I've got away with it...."think I'll have a beer"...I've got away with it....I've got away with it...."Would you like a glass of wine ?"....I've got away with it....yippee....I've got away with it....and Grabbing some white spirit to further thin the waxoil I entered the kitchen and unscrewed the waxoil lid.

I managed to borrow a compressor and was finally able to properly get to all those internal areas. In this post I’ll go over how and where I waxoyled the van. Long term, it forms a semi-solid skin of wax (demi-semi-solid in average Scottish temperatures) under which rust continues.This gun has a screw thread that is designed to fit onto many popular undersealing products – except, for some reason, Waxoyl. I emptied out a tetrashutz tin and used that. It sat there and looked at me the way only a cat can... it sniffed (unapprovingly) the dripped waxoil, and I said… If you really want to protect and get Waxoyl to do what it's supposed to do, then (as I do with all of my cars) pay for a professional steam clean of the underside and professional Underbody Seal with a pressurised delivery system. Then Waxoyl on top of that yourself with a tin of Waxoyl and a manual hand sprayer every year. During summer is best, then it's protected for winter. This did not improve the sink/kitchen area one little jot, .....ever tried holding a 'waxoiled cat' in a sink with water and rags, and especially when cat does not enjoy it ? Clutching hot waxoil injector thingy, part filled with waxoil and mixed with very very warm white spirit I squirted and soaked the chassis blasting away, and also practising holding my breath as it went misty in the workshop.

Nowadays though theres better things available, Dinitrol is good, I used this in my Capri and so far had no rust at all in all treated areas. But I now use Bilt Hamber Dynax s50, it is superb stuff, and again ive not had any rust in treated areas. Waxoyl should help stop water getting in to connectors and terminals, causing corrosion. I also put some on the battery terminals and the main chassis ground connection.

It most certainly works, I've used it for years. Yes, it kills existing rust. Yes, it stops new rust forming. It's particularly good for inside doors and box sections. To help you achieve this, we offer a full suite of rust treatment products, including: Car rust remover I don’t know much about compressors. This was my first time using one. All I know is that the maximum value on the dial was about 115psi (about 8 bar) which is more than enough for this job – I know because I tested it out and it got incredibly messy. Thhhhuuuumpppppppp !…grwat big snotty big dollop spewed out over the kitchen worksurface... no probs I thought, ...I’ll sort that out when I’ve finished, as I might make "a little bit more mess yet".... glad she's not in. I decided to use a Waxoil gun and my compressor, I had the propane burner on in the workshop since 3.00pm flat out and it was like the sahara, in fact it was so hot I decided a T-shirt and shorts was the dress code.