beyerdynamic DT 770 PRO Studio Headphones - 250 Ohm

Product Information

Impedance measures how much a device, like headphones, resists electrical current from a source, like a music player. Impedance can be considered the electrical resistance of the headphones, affecting how loud they can get and how well they work with different devices. We thoroughly researched and analyzed the FiiO K5 Pro DAC and have found that it is an excellent option for headphone enthusiasts looking for high-quality audio. The reason why I said the taste is because people always buy technical things like headphones and other stuff based on their taste in music delivery. Some like it rough and some like it soft on the ears. So, you can never tell what a person will like in an electronic device especially headphones. Let’s talk about the features of Beyerdynamic DT 770 pro 80 ohms and 250 ohms:

Personally, I think the sound signature of the 880s is so different from the Amirons and the 770s that I would hesitate to compare them. However, I am sure that some people would identify some traits in the sound of the 770s and 880s as being similar and that the Amirons are the more different headphone of the three, but I am describing my subjective experience here and am not trying to be objective. By any measure, the 770 Pro 80s are very comfortable, good sounding headphones that represent very decent value for money. We thoroughly researched and analyzed the Cambridge Audio DacMagic 200M DAC and found that it is an excellent choice for headphones with impedance ranging from 10 ohms to 600 ohms.INTERFACE: Focusrite Scarlett Solo AMPLIFIER: SMSL SP200 THX AAA-888, XDUOO XD-05 Basic DAC: SMSL Sanskrit 10th MKII (upgraded AK4493 Version) In addition to impedance and sound pressure level, frequency also matters for buying a DAC amp. The frequency range of your headphones determines the amount of detail and nuances that can be reproduced in the sound. If your headphones have a wide frequency response, you'll want an amplifier that can accurately amplify all of the sound frequencies without distortion or loss of detail.

We highly recommend this DAC amp for its exceptional performance, versatility, and flexibility. This DAC is relatively more expensive than entry-level DACs, which may be a downside for some budget-minded audiophiles.

There are 16ohms, 32 ohms, 80 ohms, and lastly 250 ohms nominal impedance in which you can get these headphones. These variant impedances serve different purposes according to the users’ needs. I haven't tried the 250 Ohm model, I don't know but I tried it on the 80 ohm model and I realized that I don't need an amplifier. A mediocre laptop did its job well and fed my ears enough when the necessary equalizer settings were made. We thoroughly researched and analyzed the ARC Mk2 DAC and have discovered that it offers exceptional audio quality and versatility.

We are particularly impressed by the ARC Mk2 DAC's versatility and accessibility, as it offers several options for connecting to different devices, making it easy to use with a wide range of devices. For closure, I run these headphones through Focusrite Scarlett 4i4 3rd Gen audio interface and you achieve the "medium-to-high" volume at 60% of the knob-turn. At 100%, you can listen to it, but that's just blazing and a bit too loud.These headphones are more durable than stylish so we can easily guess its main purpose is durability. The 80-ohm headphones have a straight cable of 10-foot. On the other hand, a 250-ohm headphone has a 10-foot coiled cable. Among the cables, the coiled cable is of a marginally higher caliber. Concernant la spatialisation, je trouve que la scène est étonnamment large pour un casque fermé. On situe sans difficulté la position d’un instrument dans l’espace ( ou d’un ennemi si vous l’utilisez en gaming, ce qu’il m’arrive de faire ), sans pour autant égaler l’ampleur de la scène d’un casque ouvert ( ce qui est normal, rien de nouveau sous le soleil ). Sur ce point, mon GAME ONE ou mon HD-660S sont par exemple un cran au-dessus, mais si je tiens compte du fait que ce casque est fermé, je le trouve très bon. I use the RME Babyface Pro Fs, more than enough gain. But on my samsung phone max volume is about 70%-80% of what I would prefer as ideal. It's okay, not bad, but I'd recommend an headphone preamp if you want to drive the 250ohm version just from phone. After a bit of EQ I got them to sound more natural and a bit more neutral. The 770s have a bit of a fame for strident highs. While I don't exactly agree that it is overbearing, the higher frequencies did indeed carry an extra power, which is something I don't have a particular taste for. After running some tests, I EQed them to taste by raising the lower frequencies by just a bit, as well as lowering the higher frequencies. Just a touch of gain adding and reduction here and there, and after that, they were good to go for me. Typical for a dynamic headphone from the nineties, the driver will distort once it goes into high excursion due to low frequency content or high SPL. This distortion dips below 1% only at around 105 Hz (when measured at high output levels), and throughout all of this, a nasty 3rd harmonic is very present from 60 Hz to 100 Hz so, when doing anything low-end critical, be careful as this is also present without calibration applied! How accurate and consistent is the correction effect among different listeners?

Hi, I recently bought Beyerdynamic DT-770 pro (80 ohm) for gaming and listening to music. I always play FPS (Warzone, Rainbow Six Siege ecc.). I would like to know if anyone knows the best equalizer settings to play with the DT-770 pro (80 ohm)? I use APO as equalizer. We thoroughly researched and analyzed the XDUOO XA-10 MQA DAC and have found that the it is an excellent option for high-impedance headphones ranging from 16 ohms to 600 ohms. When we talk about audio quality formats like 24-bit/96 kHz, we are referring to two important aspects of digital audio: bit depth and sample rate. The DT 770 PRO is a closed dynamic headphone of exceptional quality at a great price, suitable for demanding professional and audiophile applications. The long-term comfort and accurate performance make the DT 770 PRO excellent monitoring headphones for recording studios, post production, or broadcasting situations. The iFi xDSD Gryphon DAC is equipped with various inputs, including PC/phone-USB, 4.4mm, 3.5mm, S/PDIF, and Bluetooth, making it very versatile and versatile convenient to use with different audio sources. This DAC provides excellent compatibility and flexibility whether you listen to music on your phone, computer, or other audio devices.Based on our research and experience, any DAC amp that supports the impedance of the Beyerdynamic DT 770 PRO (250 ohms) headphones (250 ohms) and has the correct cable input should be compatible. If you're aiming to enjoy the full audio frequency range of these headphones, we recommend a DAC amp that supports a frequency range of the DT 770 PRO (250 ohms), which is 5 Hz to 35,000 Hz. While the frequency range of the headphones doesn't need to exactly match that of the DAC amps, our tests have shown that a broader range generally yields better results. For decades now, professional users all around the world have placed their trust in our classic range: DT 770/880/990 PRO. These benchmark-setting studio headphones, available in three different models, boast extremely detailed resolution and very transparent sound.