ZAC 1500W Continuous Laser Cleaning Machine 220V 1-Phase MAX Hand-held Fiber Laser Cleaner for Removing Rust, Paint, Oil, Coating Laser Cleaner Rust Removal Tool with 15m Optical Cable

Product Information

The portable handheld laser cleaning machine cost depends on different configurations and features. Our laser cleaning machines can remove rust, oxide, paint and other industrial contaminants from metal surfaces. If you have surface preparation requirements, they can also leave a slightly textured surface to improve adhesion. Now, every material has different properties and thus different molecular bonds. In other words, each material has a specific ablation threshold. To successfully remove a layer from a given material, the energy transferred by the laser beam must be above the ablation threshold of that particular material. 2. It is Possible to Remove a Material in a Highly Selective Way Laser cleaning solutions can overcome many of the problems faced with rust removal and other industrial cleaning applications. By selecting a specific material to be removed, fiber lasers offer a fast, as well as a set-and-forget solution for many industries.

The laser + inert gas method, that is, while the laser is irradiated, an inert gas is blown to the surface of the substrate. When the dirt is peeled from the surface, the gas will be blown off the surface immediately to avoid re-contamination and oxidation of the surface. Laser cleaners are designed for laser degreasing, laser paint removal, laser zinc removal, laser film removal, laser coating. Laser cleaning machines are used for rust removal from metal surface, paint removal treatment, plating, coating removal, oil, stain, dirt cleaning, and rubber mold residue cleaning. Laser cleaning machine is a type of laser ablation machine to irradiate and heat the surface material of the object with the CW (Continuous Wave) laser beam or pulsed laser beam and make it evaporate or sublime to achieve the purpose of removing the surface material. Laser cleaning machine is also known as laser cleaner, laser rust cleaning machine, laser paint removal machine, laser paint stripping machine, laser coating removal machine, laser rust removal machine, laser oxide removal machine, laser dirt cleaning machine, laser oil cleaning machine, laser descaler machine. There are two most common types of laser cleaning machines: One is CW fiber laser cleaning machine, another one is pulsed laser cleaning machine. Eco-friendly - No chemical pollutants are released during the laser cleaning process, making it one of the most environmentally friendly solutions available today. For the purpose of removing contaminants from various surfaces, we use fibre laser cleaning equipment. This equipment uses a laser beam to erode contaminants while leaving the surface intact. It is a safe, effective, and efficient way to clean fragile surfaces without causing any damage. It is also suitable for cleaning hard-to-reach areas. The following are examples, but not limited to:One experience I had with a similar laser rust remover tool involved trying to remove rust from an old metal sign that had been sitting outside for years. While the laser was effective at removing the surface rust, there were some areas where the rust had eaten away at the metal to the point where it was no longer salvageable. In those cases, it would have been better to just replace the sign entirely rather than trying to salvage it with a rust remover tool.

No use of chemicals. Rust remover chemicals can get the job done, but the health implications on their use outweigh their benefit. Such chemicals are not only harsh and abrasive but also emit intense fumes. You will need to wear protective gear such as a respirator, goggles and rubber gloves before using them. However, laser cleaning does not rely on any chemical application. It is the better choice as it does not put your health at risk.

Benefit from our years of experience in bringing laser cleaning technology to tire factories worldwide. CW fiber laser cleaning machine uses handheld clean head with continuous laser source. The advantage of CW cleaning machine is high cost performance. If you have low requirements for laser cleaning and only remove rust or thin paint of stainless steel, mild steel and iron, the cost effective CW laser cleaning machine can meet the requirements. You can think of laser ablation as similar to carving stone with a hammer and a chisel. You can use a small hammer and do many small hits on your chisel. Or, you could just as well use a bigger hammer to leverage more power, hence reducing the required number of hits and increasing the removal speed. The idea is the same with laser cleaning, except that you only want to remove a layer of material: the contaminant. For a given surface area, putting the same energy within a short pulse increases the power. It’s like using the bigger hammer. A pulsed laser beam is more efficient and provides a faster removal speed than a continuous beam. And while short laser pulses clean surfaces faster, they also ensure that the underlying material does not heat up too much. 4. It is Consumable-Free and Environmentally Friendly

The laser beam is passed over the surface until the preferred depth and area have been completely rid of the rust. At low flux, the laser energy from the beam ablates the surface while vaporizing the rust. At high flux, the laser energy converts the rust or other unwanted material to plasma. Both low and high flux get the job done, but their use depends on the type of surface in question. Our handheld laser cleaning options are optimized for projects with various uses and adjustability needs. From delicate artifacts and molds to manufacturing automotive parts, our handheld options provide the flexibility you need without sacrificing the results you’d expect across any of our laser solutions. This means you’ll gain the mobility you need to clean varying geometries, multiple part numbers, and more. Removing paint and preparing surfaces with a laser offers numerous advantages. Lasers work dry, are precise and deliver consistently good results. There is no damage to the substrate, improving lifespan and appearance - often at a lower cost. Tyre Manufacturing Compared with the traditional cleaning methods such as mechanical friction cleaning, chemical corrosion cleaning, liquid solid strong impact cleaning and high frequency ultrasonic cleaning, manual laser cleaner has obvious advantages.Cleaning with a laser is precise and with high repeatability. The dry and touchless process does not damage the underlying substrate and eliminates the use of hazardous and expensive consumables such as chemicals or blasting media. As this cleaning method only uses a laser beam to vaporize the layer to be removed, there are literally no consumables with it. This is the beauty of lasers, which only need a power plug to be set and ready to go. Laser ablation is not only used for cleaning, it's also widely used for other industrial applications. In Summary Pulsed laser cleaning machine is equipped with pulse laser source and galvo clean head. If you have high-value products need to clean and without harm the base materials, that must be use pulsed laser cleaning system.