Dell 091N324 P2418HT 24-Inch Touch LED FHD 1080p Monitor - Black

Product Information

For more information on Using the On-Screen Display (OSD) Menu, refer to the Operating Your Monitor section in the User's Guide for Dell SE2717H/SE2717HX monitor.

If your monitor screen remains blank after you use the previous procedure, check your video card (GPU) and computer, because your monitor is functioning properly. Note: If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly.

Press Button 1 or Button 2 to highlight Factory Reset option in the menu and press Button 3 to select. No Video - You are unable to see any display on the screen, able to hear the windows chime but no display is seen. When you notice screen abnormalities like distortion, clarity issues, horizontal or vertical lines, color fade etc. Use the buttons at the bottom of the monitor to access the On-Screen Display (OSD) menu of the monitor.

No POST - Your computer is not showing any indication of activity, the screen might be blank and will not display the Dell logo during start-up. If you notice any abnormalities during Built-In Diagnostics, you may get the monitor repaired/replaced if it is under warranty by contacting Dell Technical Support. Note: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. If the display cannot be detected by the computer, power off/on the monitor or unplug and replug the USB cable. Use a USB-extender cable to position the wireless USB receiver as far away as possible from the USB 3.

How to Use and Troubleshoot the Dell P2418HT Monitor Learn how to use and troubleshoot the Dell P2418HT monitor. Change the color-setting mode in the Color Settings On-Screen Display Menu (OSD) to Graphics or Video, depending on the application.

Perform monitor self-test feature check to determine if the scrambled screen appears in self-test mode.Some USB devices like external portable HDD require higher electric current; connect the device directly to the computer.