Hammerite Direct to Rust Metal Paint Aerosol Smooth Blue Finish 400ML
About this deal
To ensure compliance with the law Dulux Decorator Centre will not sell this product to any person who is or appears to be under 18 years of age.
A. Yes this handy aerosol can be sprayed onto the surface, ensure to mask off any surrounding surfaces to avoid over spray. Hammerite Aerosol Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust. On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.
This paint for rusty metal can be applied directly to rust and dries quickly, with minimal preparation. Specially formulated to perform as primer, undercoat and topcoat in one, Hammerite Direct to Rust Metal Paint Aerosol in Blue gives a smooth, gloss finish to your project. Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Acting as a primer, undercoat and top-coat all in one the aerosol delivers an even coverage that can be applied directly to rust with minimal effort (just brush off loose debris to prepare the surface for application).
Hammerite Direct to Rust Smooth metal paint provides outdoor metal surfaces with a glossy long lasting finish.
From railings to radiators and gates to garden furniture, Hammerite will protect and transform your metal. A. Yes, Hammerite has been special formulated to be applied directly to rust as it contains special anti-corrosive pigments that stop the formation of rust. Available in a handy aerosol can to offer quick and easy application on metal surfaces such as doors, garden furniture, gates and railings to name a few. On bare zinc, aluminium and galvanised surfaces, apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint. The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.
Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. Dispose of contents and container in accordance with all local, regional, national or international regulations.
Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. A. Primer or undercoat is not needed before using Hammerite paint, but it is important to ensure the surface to be treated is clean, dry and free from any dust, dirt, grease or flaking paint. Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page.
Hammerite Direct To Rust Metal Paint Aerosol Smooth Finish Is Specially Formulated To Perform As Primer, Undercoat And Topcoat In One. Remove grease with Hammerite Brush Cleaner and Thinners, then rinse with clean water and allow to dry. We offer a no quibble 14 day money back guarantee for all goods shipped correctly that are not required. Shake the aerosol can vigorously in a vertical motion, until the agitator ball is heard and continue to shake for a further 3 minutes. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture.